This dataset contains material volumes (m3), material masses (kg), and material intensities (kg/m2) for representative buildings from 51 residential building cohorts in Finland. These data are presented per material and in total, aggregated on three hierarchical levels on the correspondingly named sheets in the OpenDocument Spreadsheet (ODS) file: the entire building (data_building), distinguished between vertical building levels (data_building_level), and distinguished between building parts (data_building part). Further details on the data are provided on the description sheet in the same file.
\nThe cohorts are based on building type, main bearing material, main façade material, and construction decade. Each cohort is represented by one inventoried building, covering the combinations in the tables below. All buildings are located in the city of Vantaa, Finland, with the exception of the 1940s and 1950s houses, which are based on type-planned houses and thus have no specific location.
\nOne dwelling house cohorts included in the dataset
\n| Bearing material, Facade material | \n1940s | \n1950s | \n1960s | \n1970s | \n1980s | \n1990s | \n2000s | \n2010s | \n
|---|---|---|---|---|---|---|---|---|
| Wood, Wood | \nD | \nD | \nD | \nT | \nD | \nD | \nD | \nD | \n
| Wood, Brick | \n\n | T | \nT | \nD | \nT | \nT | \nT | \nT | \n
| Brick, Brick | \n\n | \n | D | \nD | \nD* | \nD | \nD | \nD | \n
| Concrete, Concrete | \n\n | \n | D | \nT | \nD | \nD | \nD | \nD | \n
| Concrete, Brick | \n\n | \n | T | \nD | \nT | \nT | \nT | \nT | \n
| Concrete, Wood | \n\n | \n | T | \nT | \nT | \nT | \nT | \nT | \n
Block of flats cohorts included in the dataset
\n| Bearing material, Facade material | \n1940s | \n1950s | \n1960s | \n1970s | \n1980s | \n1990s | \n2000s | \n2010s | \n
|---|---|---|---|---|---|---|---|---|
| Concrete, Concrete | \n\n | \n | D | \nD | \nD | \nD | \nD | \nD | \n
| Concrete, Brick | \n\n | \n | T | \nT | \nT | \nT | \nT | \nT | \n
D = Direct record based on construction documents.
T = Theoretical variant with alternative façade material based on typical contemporary construction practice. All properties except the cladding and any related materials (e.g. battens) are identical with the corresponding direct record (the record for the same decade with the directly recorded bearing material).
* Geometry determined based on construction documents from 1979 due to lack of suitably sized cases dated in the 1980s. Insulation thicknesses adjusted to match the represented decade’s building code.
The data are primarily based on digitized construction documents obtained from the Vantaa building inspection authority’s archives through the purchase portal Lupapiste Kauppa (https://kauppa.lupapiste.fi/). The 1940s and 1950s type-planned houses’ drawings are from the National Archives of Finland (https://astia.narc.fi/).
\nVersion notes since 1.0.0:
1.0.2: Added wood facade variants to all one dwelling houses which have concrete as the bearing material.
1.0.1: Changes to the terminology and some minor spelling corrections. The building data remain identical, as do their locations on the sheets.
The EU Open Research Repository serves as a repository for research outputs (data, software, posters, presentations, publications, etc) which have been funded under an EU research funding programme such as Horizon Europe, Euratom or earlier Framework Programmes.
\nThe community is managed by CERN on behalf of the European Commission.
\nZenodo’s general policies and Terms of Use apply to all content.
\nThe EU Open Research Repository accepts all digital research objects which is a research output stemming from one of EU’s research and innovation funding programmes. The funding programmes currently include:
\nHorizon Europe (including ERC, MSCA), earlier Framework Programmes (eg Horizon 2020) as well as Euratom.
\nIn line with the principle as open as possible, as closed as necessary both public and restricted content is accepted. See note on how Zenodo handles restricted content.
\nEU programme beneficiaries are eligible to submit content to the community. The community supports three types of content submissions:
\nSubmission via an EU Project Community (through user interface or programmatic APIs).
\nSubmission directly to the EU Open Research Repository.
\nAutomated harvesting from existing Zenodo content.
\nA representative of an EU project may request an EU Project Community and invite other project participants as members of the community. The project community is linked to one or more European Commission grants. All records in the project community are automatically integrated into the EU Open Research Repository immediately upon acceptance into the project community.
\nAny user may submit a record directly to the EU Open Research Repository. The submission will be moderated by Zenodo staff for compliance with the minimal required metadata requirements and its correctness.
\nRecords found among Zenodo’s existing content will on a regular basis automatically be integrated if they are found to comply with the requirements. The submissions through this method are integrated into the EU Open Research Repository with delay in a fully automated way.
\nRecords in the EU Open Research Repository are required to comply with the following minimal metadata requirements:
\nVisibility: Both public and restricted (with or without embargo and/or access request)
\nResource types: All resource types.
\nLicenses: Public and embargoed records MUST specify a license. The chosen license SHOULD be compliant with the Horizon Europe open science requirements (see Open Science in Horizon Europe)
\nFunding information: Records MUST specify at least one grant from the European Commission.
\nCreators: Creators SHOULD be identified with a persistent identifier (e.g. ORCID, GND, …), and affiliations SHOULD be identified with a persistent identifier (e.g. ROR, ISNI, …)
\nSubjects: Records SHOULD specify one or more fields of science from the European Science Vocabulary.
\nThese metadata requirements comes from the related open science requirements in Horizon Europe which are detailed in each project's grant agreement.
\nAll submissions undergo automated curation checks for compliance with the policy. Submissions through project communities are in addition reviewed by the project community. Submission directly to the EU Open Research Repository is in addiotn reviewed by Zenodo staff.
\nCommunity curators may at any point edit metadata of the records in the community without notice through human or automated processing. The curators may at their sole discretion remove records from the community that are deemed not to comply with the content and curation policy or which are deemed of insufficient quality.
\nThe content and curation policy is subject to change by the community owner at any time and without notice, other than through updating this page.
", "description": "Open repository for EU-funded research outputs from Horizon Europe, Euratom, and earlier Framework Programmes.", "funding": [ { "funder": { "id": "00k4n6c32" } } ], "organizations": [ { "id": "00k4n6c32" } ], "page": "The EU Open Research Repository is a Zenodo-community dedicated to fostering open science and enhancing the visibility and accessibility of research outputs funded by the European Union. The community is managed by CERN on behalf of the European Commission.
\nThe mission of the repository is to support the implementation of the EU's open science policy, providing a trusted and comprehensive space for researchers to share their research outputs such as data, software, reports, presentations, posters and more. The EU Open Research Repository simplifies the process of complying with open science requirements, ensuring that research outputs from Horizon Europe, Euratom, and earlier Framework Programmes are freely accessible, thereby accelerating scientific discovery and innovation.
\nThe EU Open Research Repository serves as a complementary platform to the Open Research Europe (ORE) publishing platform. Open Research Europe focuses on providing a publishing venue for peer-reviewed articles, ensuring that research meets rigorous academic standards. The EU Open Research Repository provides a space for all the other research outputs including data sets, software, posters, and presentations that are out of scope for ORE. This holistic approach enables researchers to not only publish their findings but also share the underlying data and materials that support their work, fostering transparency and reproducibility in the scientific process.
\nThe EU Open Research Repository is funded by the European Union under grant agreement no. 101256740 (HORIZON-ZEN Plus). For more information about the project see https://about.zenodo.org/projects/horizon-zen/.
", "title": "EU Open Research Repository", "type": { "id": "organization" }, "website": "https://research-and-innovation.ec.europa.eu" }, "revision_id": 24, "slug": "eu", "theme": { "brand": "horizon", "enabled": true, "style": { "font": { "family": "Arial, sans-serif", "size": "16px", "weight": 600 }, "mainHeaderBackgroundColor": "#FFFFFF", "primaryColor": "#004494", "primaryTextColor": "#FFFFFF", "secondaryColor": "#FFD617", "secondaryTextColor": "#000000", "tertiaryColor": "#e3eefd", "tertiaryTextColor": "#1c5694" } }, "updated": "2026-03-31T12:29:43.596724+00:00" } ], "ids": [ "f0a8b890-f97a-4eb2-9eac-8b8a712d3a6c" ] }, "id": "7981585", "pids": { "doi": { "client": "datacite", "identifier": "10.5281/zenodo.7981585", "provider": "datacite" } } }, "pids": { "doi": { "client": "datacite", "identifier": "10.5281/zenodo.10598038", "provider": "datacite" }, "oai": { "identifier": "oai:zenodo.org:10598038", "provider": "oai" } }, "revision_id": 6, "stats": { "all_versions": { "data_volume": 313771128.0, "downloads": 460, "unique_downloads": 453, "unique_views": 1964, "views": 2111 }, "this_version": { "data_volume": 81108832.0, "downloads": 112, "unique_downloads": 112, "unique_views": 452, "views": 481 } }, "status": "published", "swh": {}, "updated": "2024-02-01T07:21:27.471686+00:00", "versions": { "index": 3, "is_latest": false } }