id;Team;node_type;UploadedDate;Description;Insights;Images;Name;Type;TypeOfRationale;Rationale;Tags;Concept (Pneumatics = 1, springs = 2, Elastic = 3, other= 4);Specified concept;;;
28;2;Prototype;2023-10-17T09:08:32.665Z;Used presssurized air and a tube to shoot projectile at slight angle;It works very well. Would like to make a setup to test with different angles. ;['2023_10_17_09_07_56_393383333_1979345829116538_2647317790645644528_n.jpg', '2023_10_17_09_08_30_388919210_6743665989054941_8628125544770209615_n.mp4'];Fire nerfant;physical;exploration;We wnated to see if using pressurized air would work, or if we had to go in a different direction.;Test1;1;;;;
29;1;Prototype;2023-10-17T09:15:59.215Z;Wooden planks with spring attached;Springs are cool. Loads of potential energy;['2023_10_17_09_15_52_393723228_297878546468167_8614126224681288189_n.jpg', '2023_10_17_09_15_54_393715496_280028048331538_8202335263881931527_n.jpg'];Spring-it;physical;exploration;Test spring stiffness and make a general idea of a potential spring system designs.;;2;;;;
30;4;Prototype;2023-10-17T09:41:42.349Z;Tester skuddmekanismen ved å trekke en stålkule bak med en ballong, som så skal skile seg fast inni nerfprosjektilet for å gi mer masse så den kan fly lenger.;Vanskelig å få stålkulen til å bli sittende.;['2023_10_17_09_41_32_393629539_1364193757860219_1364606445423567962_n.jpg', '2023_10_17_09_41_35_393621003_1592970338114232_3837025508224617412_n.jpg'];Test_Mech_1_BallongdrevenSkuddmekanisme;physical;refinement;Just testing;Test1;3;;;;
31;6;Prototype;2023-10-17T09:44:13.800Z;Potetkanon laget med 1,5 L brusflaske med et sugerer som indre løp;Koneptet fungerer. Sugerøret smeltet, trenger annet materiale;['2023_10_17_09_44_09_IMG_0712.MOV'];potetkanon sugerør;physical;active_learning;Teste ut om konseptet er realistisk;"potetkanon;sugerør;indreLøp";1;;;;
32;4;Prototype;2023-10-17T09:49:20.014Z;Testet for å se hvor god flyteevne en ballong har med en nerf festet i bunn.;Funket særdeles dårlig uten helium;['2023_10_17_09_49_13_393746822_659765566256821_8453683252918495360_n.jpg'];Heliumballong;physical;refinement;Test;Test1;4;Helium balloon;;;
33;5;Prototype;2023-10-17T10:16:56.203Z;We tried to make a pneumatic system with a ball valve, bike pump and pressure vessel. The bike pump was broken and the valve and vessel did not fit together;;['2023_10_17_10_15_32_IMG_8766.HEIC', '2023_10_17_10_15_38_IMG_8767.HEIC'];Pnaumatic test;physical;exploration;;Pneumatic;1;;;;
34;6;Prototype;2023-10-17T10:43:13.915Z;Potetkanon med ytre løp;Trenger mer undersøkelse på tennkammeret;['2023_10_17_10_42_30_IMG_0718.MOV', '2023_10_17_10_47_43_IMG_0718.MOV', '2023_10_17_10_47_43_IMG_0718.MOV'];Potetkanon brøyepinne;physical;refinement;Teste om ytre løp fungerer;"potetkanon;brøytepinne;ytreLøp";1;;;;
35;6;Prototype;2023-10-17T10:46:58.104Z;Potetkanon med et kobberrør som indre løp;Trenger bedre blandingskammer, kobberrøret fungerer bra;['2023_10_17_10_46_09_IMG_0719.MOV'];Potetkanon kobberrør kort;physical;refinement;Teste om mer varmebestandig materiale vil fungere som løp;"potetkanon;kobberrør;kort;indreLøp";1;;;;
36;2;Prototype;2023-10-17T11:35:35.679Z;Using two springs attached to a case for launching the nerf-dart.;Didnt work as expected. Was really hard to coil up the spring and release without loosing energy.;['2023_10_17_11_35_29_393720246_300228662753484_3353101456568663771_n.jpg', '2023_10_17_11_35_31_393706886_887930155508362_5035832110513297008_n.jpg'];Double-Spring-it;physical;exploration;The prototype was made for exploring the affect of two springs rather than one spring.;"TwoSprings;Unsure";2;;;;
37;2;Prototype;2023-10-17T11:40:29.068Z;Sketch of idea for using one spring to shoot the nerg along a path. Contains spring placement and idea for shooting the nerg along a path.;What different types of components necessary to create the physical prototype;['2023_10_17_11_40_26_Sketch1.jpg'];Rifle-Sketch;physical;exploration;Sketching to get an idea of how to design the spring system.;"Sketch;OneSpring";2;;;;
38;1;Prototype;2023-10-17T11:46:07.783Z;Laser kuttet et stativ i 45 graders vinkel;Vil på Ubåten føre til at prosjektil treffer taket, må se på andre løsninger. ;['2023_10_17_11_45_52_393222903_3597188550530326_3114819471979183040_n.jpg', '2023_10_17_11_46_02_393443806_3597536807240411_455065947032917751_n.jpg', '2023_10_17_11_46_05_393500043_369783078719311_1703435518130651084_n.jpg'];Angled fire nerfant;physical;exploration;Leste at 45 grader er optimal vinkel for å skyte prosjektiler langt.;Test2;2;;;;
39;4;Prototype;2023-10-17T11:51:30.054Z;Den skal skyte en prosjektil gjennom et rør ved bruk av strikk som skal videre ta med seg nerf;har ikke enda fått testet denne da den tar litt tid å printe;['2023_10_17_11_51_20_prototype_3D_print.PNG'];3D-printet skytemekanisme med rør og strikk;physical;exploration;vi vil teste strikk drevet skyting med vektdoping, men fant ikke et rør som var riktig dimensjoner, derfor printer vi en enkel prototype for å teste konseptet;test 1;3;;;;
40;6;Prototype;2023-10-17T11:58:25.278Z;Nytt tennkammer laget av en mindre flaske med tykkere vegger;Fungerer bra med mindre kammer;['2023_10_17_11_58_16_IMG_0727.MOV'];Potetkanon kobberrør kort drikkeflaske;physical;refinement;teste mindre kammer med mer rigide vegger;"potetkanon;kobberrør;kort;indreLøp;drikkeflaske";1;;;;
41;5;Prototype;2023-10-17T12:00:00.649Z;Drawing of the design by chatgbt. Two pipes, one for the spring and one for the dart is held in place by two beams. The spring will accelerate the dart.;;['2023_10_17_11_59_57_IMG_8773.HEIC'];Spring sketch;physical;exploration;;Spring drawing 1;2;;;;
42;6;Prototype;2023-10-17T12:00:04.712Z;Samme som forrige, men med lengre rør;GIkk kortere enn det korte løpet;['2023_10_17_12_00_01_IMG_0737.MOV'];Potetkanon kobberrør lang drikkeflaske;physical;refinement;Teste med lengre løp;"potetkanon;kobberrør;lang;indreLøp;drikkeflaske";1;;;;
43;5;Prototype;2023-10-17T12:02:10.084Z;Test of two pipes held in parallel by a wood block and ducttape;;['2023_10_17_12_02_06_IMG_8771.HEIC'];Spring assembly 1;physical;exploration;;Spring assembly 1;2;;;;
44;6;Prototype;2023-10-17T12:02:20.728Z;Kortere ytre rør som er mer tettsittende;Fungerte veldig bra. Kanskje bedre om det hadde vært plass til å dytte pila helt inn;['2023_10_17_12_02_11_IMG_0729.mov'];Potetkanon skistav;physical;refinement;Teste tettere løp;"potetkanon;skistav;kort;ytreLøp";1;;;;
45;5;Prototype;2023-10-17T12:05:19.147Z;Based on the placement of the pipes in the last iteration, the orange one that will be hit by the plate needed to be fastened more securely. This was done by finding the largest hose clamp and using a smaller wood block. This block was fastened to the tubes and subsequently tested ;;['2023_10_17_12_05_16_IMG_8772.HEIC'];Spring assembly 2;physical;refinement;;;2;;;;
46;4;Prototype;2023-10-17T12:10:57.424Z;Teste hvor langt man kan skyte kun ved lufttrykk og vekt;;['2023_10_17_12_10_50_393518244_1255752131768954_4185564813731659068_n.jpg'];AirPressureGun;physical;refinement;;Test2;1;;;;
47;3;Prototype;2023-10-17T12:14:26.220Z;Creating a pressure inside the PET bottle as an energy source for the projectile to gain velocity. Long barrel used for long distance increase of speed.;The long barrel increases the speed, and the friction between the projectile and inside barrel does not seem limiting. We will continue with long barrel. We want to increase pressure. PET bottles can take up to 150psi.;['2023_10_17_12_13_29_First.jpg', '2023_10_17_12_13_49_Prototype_1.jpg'];Bottle pressure Gun;physical;exploration;Prototype used for validation of design, proof of concept.;"Pressure; Bottle; Long barrel";1;;;;
48;3;Prototype;2023-10-17T12:20:56.913Z;Valve added to control the pressure release;Concept seems promising, but does not manage to build desired pressure. Will iterate upon more pressure tight system.. We do suspect that the valve is too slow operating for us. Might look into other options for valve, but concept works good. Shoots easily 10m, difficult to measure since greenroom isn't long enough. Projectile curve is almost straight over the distance in greenroom (~5m);['2023_10_17_12_20_33_Prototype_2.jpg', '2023_10_17_12_20_37_Ventil.jpg', '2023_10_17_12_20_42_With_valve.jpg', '2023_10_17_12_20_48_Shooting_first_prototype.jpg'];Bottle pressure Gun 2;physical;active_learning;Wanted to have a way to control the release of pressure. 12V electronic valve was found and implemented to system.;"Valve; Pressure; Electronic pulse";1;;;;
49;3;Prototype;2023-10-17T12:51:14.372Z;Concept 1: 2 motors connected to each wheel. Right rotation.;;['2023_10_17_12_50_42_393426089_1728701914299423_7412262337476332233_n.jpg',;First concepts;physical;exploration;;;4;opposite motors spinning;;;
50;3;Prototype;2023-10-17T12:51:14.372Z;;;;Consept 2: direct high-pressure air into a long pipe. The air increases the speed of the projectile, this given a good seal.;; '2023_10_17_12_50_47_393836718_333296119422063_6157339877779657488_n.jpg', ;First concepts;physical;exploration;;;1;
51;3;Prototype;2023-10-17T12:51:14.372Z;;;;Concept 3: Based on concept 2, but also combines vacuum in the barrel, so that air resistance is marginal.;;2023_10_17_12_51_52_393836718_333296119422063_6157339877779657488_n.jpg', ;First concepts;physical;exploration;;;1;
52;3;Prototype;2023-10-17T12:51:14.372Z;;;;Concept 4: Pressurized plastic bottle with pressure regulator and trigger. Pump pressure into the bottle with a bicycle pump.;;2023_10_17_12_52_11_393426089_1728701914299423_7412262337476332233_n.jpg'];First concepts;physical;exploration;;;1;
53;3;Prototype;2023-10-17T12:57:39.812Z;Test of long tube for execution of Nerf Dart. Pressure is created by your own lungs.;;['2023_10_17_12_57_33_393756378_357618913364677_364116728833585579_n.jpg'];Long pipe first test;physical;exploration;;;1;;;;
54;5;Prototype;2023-10-18T08:32:08.117Z;Added a more sturdy base and a hose clamp around the bottom of the dart holder to hold the dart with friction;By changing the shooting technique, we managed to launch way further.;['2023_10_18_08_30_32_IMG_8775.HEIC', '2023_10_18_08_30_38_IMG_8776.HEIC'];Spring assembly 3;physical;refinement;;;2;;;;
55;1;Prototype;2023-10-18T08:48:02.656Z;Stål rør istedet for plast rør. ;Det fungerer med stålrør. Må teste mer for å se hvor mye det har å si;['2023_10_18_08_47_33_393846227_685677956846014_3835079335589640621_n.jpg', '2023_10_18_08_47_51_388926560_6642029442570966_4942570827098834901_n.mp4'];Hard barrell;physical;refinement;Plast røret var bøyd.;Test3;1;;;;
56;1;Prototype;2023-10-18T08:55:54.822Z;Mykt rør på innsiden av prosjektilet.;Første gikk i stykker, men resten var gode skudd med mye kraft. Tester mot test1 og test 4 utendørs for å sammenligne lengder;['2023_10_18_08_55_54_393568541_3411338059083418_8966255841592732837_n.jpg'];Soft internal barrell;physical;refinement;Teste om man fikk mer kraft ved å sette trykket på innsiden av prosjektilet.;Test4;1;;;;
57;2;Prototype;2023-10-18T10:00:45.639Z;spring inside barrel, front loaded;less friction than previous designs;['2023_10_18_10_00_41_393683281_2985470528250991_5414471146371871005_n.jpg'];muskedunder barrel;physical;exploration;test different spring config;;2;;;;
58;2;Prototype;2023-10-18T10:03:18.666Z;ease trigger function with pivot point;need taller pivot point;['2023_10_18_10_02_16_387538009_317560587560523_7099972024239282725_n.jpg'];trigger support;physical;refinement;made to ease the triggering of the shot;;2;;;;
59;2;Prototype;2023-10-18T10:04:43.916Z;tall trigger pivot;works better hehe;['2023_10_18_10_04_30_393854954_863620568344120_1061799145676195026_n.jpg'];trigger support 2;physical;refinement;made to raise the pivot point of the trigger arm for easier actuation;;2;;;;
60;2;Prototype;2023-10-18T10:07:31.232Z;angled stand for the barrel;need thicker material, maybe 6mm mdf;['2023_10_18_10_07_00_393626561_324284080195155_6483894979861366665_n.jpg'];barrel stand;physical;exploration;made to get a free standing model;;2;;;;
61;4;Prototype;2023-10-18T10:51:30.811Z;;;['2023_10_18_10_51_22_393614358_336913162350242_8223578055342345346_n.jpg'];Fjærdreven skyter;physical;refinement;;Test1;2;;;;
62;5;Prototype;2023-10-18T10:57:29.184Z;Dc motor driven mechanism for pulling a pin to launch the spring. The pin is connected to the motor by a string;Using a dc motor to release  pin makes the release fast;['2023_10_18_10_57_26_20231018_124730.jpg'];Dc driven fire mechanism;physical;exploration;Suggested by gpt;"Dc motor; spring; pin;release; electric";2;;;;
63;5;Prototype;2023-10-18T11:36:58.396Z;Free standing platform that can adjust the angle of the mechanism;;['2023_10_18_11_36_51_20231018_133236.jpg', '2023_10_18_11_36_55_20231018_133234.jpg'];Free standing adjustable platform;physical;exploration;We need a way to hold it free standing;"Platform; adjustablr; freestanding; wood;";2;;;;
64;1;Prototype;2023-10-18T11:51:07.417Z;Det myke røret fra test1 fungerte best, og ble kombinert med et hardt rør på utsiden for å øke stivheten.;The test showed a 2-3m improvement.;['2023_10_18_10_56_23_393641657_2984454425019432_7280151568439695481_n.jpg'];Hard and soft barrell combo;physical;refinement;Laget for å optimalisere prototypen som ga best resultat i forrige test. Vil kunne skyte rette linjer, og trengte derfor avstiver av det myke røret. ;Test5;1;;;;
65;1;Prototype;2023-10-18T11:54:12.937Z;Inkluderte et feste til det harde røret for å kunne kontrollere vinkel på rør. ;Ulike vinkler gav ulike svar, og vi fant en relativt optimalisert vinkel;['2023_10_18_11_54_25_393920590_156856230782283_7923989206300078609_n.jpg'];Hard and soft with angle;physical;refinement;Ble laget for å kunne teste virkning av ulike vinkler på avstand man kunne skyte prosjektil;Test6;1;;;;
66;6;Prototype;2023-10-18T11:59:42.381Z;"MDF body with balloon-animal balloons as ""rubber""";Works very well, wanted to shoot just the tip for better aerodynamics, but whole dart flew farther than just a head, flew over 20m;['2023_10_18_11_59_37_393897956_1462300554331492_5451052291331243486_n.jpg'];Slingshot balloon;physical;exploration;Test out if it would work;"slingshot;balloon";3;;;;
67;6;Prototype;2023-10-18T12:23:41.209Z;head of a 0.5 flask with a condom with dart inside;Condoms are viable, need more testing to determine best kind;['2023_10_18_12_23_36_394021990_1663395967489582_1048303590171711652_n.jpg'];Slingshot simple condom;physical;active_learning;See if condoms are a viable option instead of balloons. Tested with 3 different balloons: classic, slim fit and latex-free;"condom;slingshot;simple";3;;;;
68;6;Prototype;2023-10-18T12:44:05.796Z;Same as original slingshot with condoms instead;Latex-free condoms go farthest, continuing with this material;['2023_10_18_12_43_56_393879213_845543740391456_6421838483806782482_n.jpg', '2023_10_18_12_44_00_393829925_237815382605699_5440769021714838077_n.jpg'];Slingshot condom;physical;active_learning;Find out which condom type is best and comparing to balloons;"slingshot;condom";3;;;;
69;5;Prototype;2023-10-18T12:48:32.768Z;;;['2023_10_18_12_48_27_IMG_8788.HEIC'];Bolt in dart;physical;exploration;Add weight to the dart. ;"Dart; Bolt";4;Bolt in dart;;;
70;5;Prototype;2023-10-18T12:54:01.651Z;To improve the tolerances between the pipe and dart (it was a laser cut mdf), a washer was grind down to the size of the pipe, with a measured difference of diameter between pipe and disk of 0.3mm.;;['2023_10_18_12_53_59_IMG_8791.jpg'];Dart pusher improvement;physical;refinement;;"Disk; washer; grinding";2;;;;
71;6;Prototype;2023-10-18T12:56:28.957Z;Release mechanism for slingshot, sketch;Christian agrees;['2023_10_18_12_56_24_393317353_1700406887132330_4733225420176818781_n.jpg'];Release mechanism sketch;physical;communication;Explain idea for release mechanism to team members;"sketch;slingshot;release;mechanism";3;;;;
72;5;Prototype;2023-10-18T13:15:26.718Z;Instead of a mdf ring for pushing the dart, it is now a metal ring with a bolt. The ring has 3 fish lines attached to even out the drag;;['2023_10_18_13_15_23_20231018_151040.jpg'];Metal ring shooting platform;physical;refinement;To improve om the contact between the dart and shooting platform;"Shooting platform; metal; spring;";2;;;;
73;3;Prototype;2023-10-18T13:19:05.768Z;Avoid air leakage;The bottle got pressure tight;['2023_10_18_13_17_06_glue.jpg'];Bottle pressure Gun 2;physical;refinement;The bottle was leaking pressure and we had the idea to tight in from the inside. In this way the pressure inside bottle will work our way, to tight it additionally. Found two component epoxy and added dome around the valve.;Glue;1;;;;
74;3;Prototype;2023-10-18T13:21:01.811Z;Magasin;Not yet tested but works as planned so far.;['2023_10_18_13_20_54_mag1.jpg', '2023_10_18_13_20_58_mag3.jpg', '2023_10_18_13_21_14_mag1.jpg', '2023_10_18_13_21_17_mag3.jpg', '2023_10_18_13_21_20_mag2.jpg', '2023_10_18_13_21_14_mag1.jpg', '2023_10_18_13_21_17_mag3.jpg', '2023_10_18_13_21_20_mag2.jpg'];Bottle pressure Gun 2;physical;active_learning;Wanted to mage a magasin function. Earlier we inserted the dart from tip of barrel and pushed it in with a long thin stick. With the new design, the dart can be inserted directly into the barrel and secured with a overlapping tube.;Magasin;1;;;;
75;5;Prototype;2023-10-18T13:51:09.829Z;Removed the metal bolt to reduce weight;The dart goes faster if there is less mass in the launching platform;['2023_10_18_13_51_07_20231018_154130.jpg'];Single metal ring for shooting;physical;refinement;Reduce weight and increase launch speed;"Metal ring;";2;;;;
76;5;Prototype;2023-10-18T13:51:12.390Z;;Provided with the measurment and option to reduce the diameter of the disk to make the tape fit, it decided to go with the disk without electrical tape;['2023_10_18_13_51_09_IMG_8792.jpg'];Dart pusher disk with electrical tape;physical;refinement;Add electrical tape to make a better seal between pipe and disk.;"Disk; washer; grinding; eltape";2;;;;
77;3;Prototype;2023-10-18T14:14:01.415Z;Improve connections;The connection was improved. Way less leakage;['2023_10_18_14_11_01_tube.jpg'];Bottle pressure Gun 2;physical;refinement;Made bacause we did not manage to build desired pressure. A distinct leaking noice from the valve connection told us that we need to refine the connection. This was solved by adding a tube with better connection points in both ends. Thread tape was also added for best fit.;;1;;;;
78;6;Prototype;2023-10-18T15:16:51.704Z;First prototype of sketched release mechanism;Has potential, will need to be stronger to be able to hold;['2023_10_18_15_16_46_393884038_941308910759389_5645986308695459738_n.jpg'];Release mechanism;physical;active_learning;See how viable it was and learn how to improve it;"release;mechanism";3;;;;
79;6;Prototype;2023-10-18T15:18:39.978Z;Added support on top aswell to not bend pins, added additional screws to support vertically;Works good enough!;['2023_10_18_15_18_35_393668913_3498094030412517_814820372000683147_n.jpg'];Release mechanism improved;physical;refinement;From insight from first physical prototype of release mechanism;"release;mechanism;improved";3;;;;
80;6;Prototype;2023-10-18T15:21:14.198Z;Laser cut holder for potato cannon;It holds the flask;['2023_10_18_15_21_09_394147005_993990285206079_719935566293869296_n.jpg'];Potato cannon holder;physical;exploration;Due to security issues, it was determined the potato cannon should not be handheld anymore, thus a holder was designed.;"potato;cannon;mdf;holder";1;;;;
81;3;Prototype;2023-10-18T15:46:41.018Z;Gun assembly with painted bottle and laser cut externals;;['2023_10_18_15_42_59_gun1.jpg', '2023_10_18_15_43_04_gun_mag.jpg'];Bottle pressure Gun 2;physical;exploration;Focus on the exterior and the representation of the product. ;;1;;;;
82;3;Prototype;2023-10-18T15:48:19.195Z;New wiring;;['2023_10_18_15_47_02_new_wiring.jpg'];Bottle pressure Gun 2;physical;refinement;New wiring to be able to pull the trigger from a distance;;1;;;;
83;3;Prototype;2023-10-18T15:49:59.603Z;Silencer;;['2023_10_18_15_49_55_silencer.jpg'];Bottle pressure Gun 2;physical;refinement;Made a silencer for street creds;;1;;;;
84;6;Prototype;2023-10-19T06:19:46.025Z;Plate for fastening of balloons to the front of the slingshot;Works well;['2023_10_19_06_19_42_IMG_0776.HEIC', '2023_10_19_06_20_00_IMG_0776.HEIC', '2023_10_19_06_20_42_IMG_0776.HEIC'];Slingshot front plate;physical;refinement;Needed new holder for longs slingshot;"slingshot;plate";3;;;;
85;3;Prototype;2023-10-19T06:53:20.748Z;3D-printed trigger to gun;;[];Bottle pressure Gun 2;physical;refinement;;;1;;;;
86;3;Prototype;2023-10-19T06:56:54.743Z;Laser cut frame for assembly;;['2023_10_19_06_56_37_IMG-3278.jpg', '2023_10_19_06_57_55_IMG-3277.jpg', '2023_10_19_06_58_03_IMG-3278.jpg'];Bottle pressure Gun 2;physical;refinement;;;1;;;;
87;1;Prototype;2023-10-19T07:07:49.456Z;Vil finne ut om å sette prototypen høyere vil ha effekt på distanse reist.;Det fungerte, nådde nye lengder;['2023_10_19_07_07_48_384545908_696697428709911_7816290032331473196_n.jpg'];Hightened firenerfant;physical;refinement;Ville se om prosjektilet gikk lengre når skutt fra høyere høyde.;Test7;1;;;;
88;4;Prototype;2023-10-19T07:11:26.181Z;Ønsker å lage en mekanisme der vi skyter ut et papirfly som darten er festet til, som vil flyte en lengde i luften.;Det funket veldig bra. Lite friksjon.;['2023_10_19_07_11_22_393957601_348307641098203_2553269054051755876_n.jpg'];Paperplane_Canon;physical;refinement;For å teste at to rør fungerer som spor for papirflyet og følge ut fra kanonen.;;4;;;;
89;4;Prototype;2023-10-19T07:15:10.827Z;Pappmockup;Found a nice design.;['2023_10_19_07_14_51_393137579_24204344265827255_7065348708544492178_n.mp4', '2023_10_19_07_14_57_394010400_1360521641561687_6097903505397088852_n.jpg', '2023_10_19_07_15_03_393626552_796489552240898_1214660865181433230_n.jpg'];Paperplane_Canon_v2;physical;refinement;To find out the design of the canon without using to much time.;Mockup;4;;;;
90;4;Prototype;2023-10-19T07:18:10.720Z;Test paperplane;;['2023_10_19_07_18_03_394190156_1705115819962897_8285169323405508491_n.jpg'];Paperplane_Canon_Paperplane1;physical;refinement;Test different planes;Plane1;4;;;;
91;4;Prototype;2023-10-19T07:19:19.897Z;Plane 2;;['2023_10_19_07_19_11_394000050_2057595481257461_1080943964676672005_n.jpg'];Paperplane_Canon_Paperplane2;physical;refinement;Testing;Plane2;4;;;;
92;4;Prototype;2023-10-19T07:20:34.423Z;Plane 2. World record plane from YT;;['2023_10_19_07_20_27_393761335_323648513645354_8842667542141953501_n.jpg', '2023_10_19_07_20_30_393900382_228589113563305_2080803783953019101_n.jpg'];Paperplane_Canon_Paperplane3;physical;refinement;Testing;Plane3;4;;;;
93;4;Prototype;2023-10-19T07:21:55.554Z;Plane 3 but with harder paper;;['2023_10_19_07_21_49_393945684_341331495059312_9084252278692593586_n.jpg', '2023_10_19_07_21_51_393520173_987559349003396_359890839798335563_n.jpg'];Paperplane_Canon_Paperplane3_v2;physical;refinement;Test;Plane3_2;4;;;;
94;4;Prototype;2023-10-19T07:26:12.774Z;Laserkuttet rigg for kanonen så det er mulig å endre vinkel på rampe;;['2023_10_19_07_26_08_394031050_294617316856997_5147723911404621300_n.jpg'];Paperplane_Canon_Stand;physical;refinement;To be able to test how different angles affect the range;"CAD; LaserCutter; FinalPrototype; ForTesting";4;;;;
95;6;Prototype;2023-10-19T07:27:04.098Z;Release pin for release mechanism;Concept is good, too much friction when rubber is stretched;['2023_10_19_07_26_58_394204703_858327988998043_709115490234233503_n.jpg'];Release pin;physical;exploration;Need something that can be pulled to release the slingshot and fire;"release;pin;bolt;string";3;;;;
96;6;Prototype;2023-10-19T07:29:24.898Z;Sketched release mechanism in fusion for laser cutting;(y);['2023_10_19_07_29_23_Screenshot_2023-10-19_092904.png'];Release mechanism DXF;digital;refinement;Being able to lasercut release mechanism to test;"release;mechanism;sketch;dxf";3;;;;
97;1;Prototype;2023-10-19T07:29:54.575Z;Forbedret vinkelen ved å legge til flere deler og bygge opp inn mot brannslukningsapparatet. ;;['2023_10_19_07_29_38_393937831_1439742883250032_2277080135456834340_n.jpg', '2023_10_19_07_29_42_393960630_1030546338091403_681429908437635260_n.jpg', '2023_10_19_07_29_46_393993595_1036760431006286_5442578173462898209_n.jpg', '2023_10_19_07_29_50_394010422_3627414777580582_3334987039722443155_n.jpg'];Heightened 2.0;physical;refinement;Det harde røret var ikke helt stabilt, og ga varierende vinkel. Ville rette dette.;Test8;1;;;;
98;4;Prototype;2023-10-19T07:30:05.522Z;MockUp av metoden for hvordan å skyte papirflyet uten vår hjelp.;;['2023_10_19_07_29_58_IMG_7028.jpg', '2023_10_19_07_30_01_IMG_7029.jpg'];Paperplane_Canon_UnleaseMech;physical;refinement;;"Mockup; Test";4;;;;
99;6;Prototype;2023-10-19T07:31:53.882Z;Bolt with string, sanded down bolt to decrease friction;Length is good, friction is a lot better, but decrease diameter means release mechanism opens up more;['2023_10_19_07_31_52_394039911_629339846025116_811808943334881637_n.jpg'];Release pin 2;physical;refinement;Needed longer bolt and less friction;"release;pin;2";3;;;;
100;6;Prototype;2023-10-19T07:33:41.011Z;Unthreaded part of bolt with correct diameter, with string + a handle;concept works well, happy with design;['2023_10_19_07_33_39_393998499_729556259197059_4575498215497283024_n.jpg'];Release pin 3;physical;refinement;Bigger diameter with less friction, handle to not get hurt on string when pulling hard;"release;pin;unthreaded";3;;;;
101;6;Prototype;2023-10-19T07:36:03.703Z;Bolts to connect release mechanism to main body;concept works well;['2023_10_19_07_36_02_393462523_354676483562226_542692808058586960_n.jpg'];Release mechanism fastening;physical;exploration;Being able to cock slingshot with dart inside release mechanism, see if it holds good enough;"release;mechanism;fastening";3;;;;
102;6;Prototype;2023-10-19T07:40:40.731Z;Setup for holding a bolt without head, plate is removed during pin release, and extra weight is added to the dart.;Concept work well, added weight is not allowed;['2023_10_19_07_40_36_394117909_689199743155565_8059855138332285107_n.jpg'];Extra weight inserter;physical;exploration;As rules were unclear wether it was allowed or not to add extra weight, we wanted the opportunity, should it be allowed to utilize;"extra;added;weight,insertion";3;;;;
103;2;Prototype;2023-10-19T07:49:07.931Z;Calculations for achieving the wanted angle for shooting the nerf-dart;;['2023_10_19_07_47_14_393462563_330460276333000_7106425000700912954_n.jpg'];AngleCalc;digital;refinement;Was made to calculate the distances between fastening points for achieving the wanted angle.;Calculations;2;;;;
104;2;Prototype;2023-10-19T07:51:42.216Z;CAD-model of the new Barrel stand;Got more energy out of the barrel with a more robust stand.;['2023_10_19_07_49_22_StandCadModel.PNG'];Stand-CAD;digital;refinement;Was made to visually understand how the stand would look. Made in different parts for laser-cutting and assembling. Was made in 6mm mdf rather than 3mm for a more robust stand. Also had more support-beams and different design for locking it into place;;2;;;;
105;1;Prototype;2023-10-19T07:52:31.593Z;Tilsatt dekor på prototypen;Den ble mye finere;['2023_10_19_07_52_30_393980867_1354940615427501_7651286880339496941_n.jpg'];Heightened firenerfant with decor;physical;refinement;Ville gjøre noe den siste tiden for å gjøre designet mer representabelt;Test8;1;;;;
106;2;Prototype;2023-10-19T07:54:09.568Z;Construction of the final stand with legs for more height;Got a more robust stand but the tall legs made it more wobbly, but still stands still when firing if the legs are streched out correct.;['2023_10_19_07_51_58_393867109_343429591511830_2775784167486983762_n.jpg'];FinalBarrelStand;physical;refinement;The prototype was made for achieving more height upon launch as well as a more robust barrel-stand.;;2;;;;
107;2;Prototype;2023-10-19T07:57:01.403Z;Simple controller for safety firing of the cannon.;Would be nice to reverse the direction of the current to control the motor;['2023_10_19_07_54_15_393952619_322236620392904_7731254261183230304_n.jpg'];FireController;physical;refinement;The prototype was made for being able to activate the cannon safely from distance.;Soldering;2;;;;
108;5;Prototype;2023-10-19T08:33:44.304Z;;;['2023_10_19_08_33_42_IMG_8798.jpeg'];Final spring launcher;physical;refinement;;;2;;;;
109;4;Prototype;2023-10-19T08:33:55.796Z;Final Prototype;;['2023_10_19_08_33_39_394031050_294617316856997_5147723911404621300_n_(1).jpg', '2023_10_19_08_33_42_393968168_3098408343802092_3072157184025145407_n.jpg', '2023_10_19_08_33_44_393960630_185810047833269_2275988028280534679_n.jpg', '2023_10_19_08_33_47_394176173_722749493212954_2752932365849816706_n.jpg'];Paperplane_Canon_FINAL;physical;refinement;;FinalPrototype;4;;;;
110;6;Prototype;2023-10-19T08:34:38.089Z;Put all subassemblies together on a plank;Good idea, but balloons does not work in the cold weather on demo day;['2023_10_19_08_34_37_393827850_858204812267042_1252665808430765213_n.jpg', '2023_10_19_08_36_49_394249357_1551322285678033_5627527271670366790_n_(1).jpg', '2023_10_19_08_36_49_394249357_1551322285678033_5627527271670366790_n_(1).jpg', '2023_10_19_08_36_49_394249357_1551322285678033_5627527271670366790_n_(1).jpg'];Main body;physical;refinement;Having a complete gun;"slingshot;balloon;plank";3;;;;
111;5;Prototype;2023-10-19T08:34:42.439Z;;;['2023_10_19_08_33_59_IMG_8801.jpeg'];Elastin band launcher;physical;exploration;;;3;;;;
112;2;Prototype;2023-10-19T08:34:50.441Z;Feet for a more rigid stand;"8mm threaded ""poles"" are more wobbly than first expected";['2023_10_19_08_34_47_394151333_239357025814731_1058628221524314359_n.jpg'];FootStand;physical;refinement;The prototype was made for a more rigid stand with the long legs. Used padding on the bottom for more friction and a joint for aligning to the surface.;;2;;;;
113;3;Prototype;2023-10-19T08:34:52.306Z;;;['2023_10_19_08_34_45_379986292_1002405414151946_3454178325727088333_n.jpg'];Final prototype;physical;refinement;;;1;;;;
114;5;Prototype;2023-10-19T08:35:42.968Z;;;['2023_10_19_08_34_51_IMG_8799.jpeg', '2023_10_19_08_34_57_IMG_8800.jpeg'];Dart launcher for elastin band;physical;refinement;;;3;;;;
115;6;Prototype;2023-10-19T08:36:15.520Z;Balloons didnt handle the cold weather today, hurried up and made with condoms;;['2023_10_19_08_36_13_394182843_302680422548603_7902522086995577056_n.jpg'];Condom complete version;physical;refinement;;;3;;;;
116;2;Prototype;2023-10-19T08:36:36.405Z;Threaded holes made in CAD for fastening the legs to the stand;;['2023_10_19_08_36_33_394035955_1327311214593881_22983948620350062_n.jpg'];ThreadedPolesFaster;digital;refinement;;;2;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;