MFMET A1.2.3 - Documented example of the test protocol for leakage and burst pressure

Ogheard, Florestan; Daugbjerg, Thomas Schrøder; Romieu, Kevin; Silverio, Vania

doi:10.5281/zenodo.10114802

Published November 11, 2023 | Version v1

Report Open

MFMET A1.2.3 - Documented example of the test protocol for leakage and burst pressure

1. Aarhus University
2. Centre Technique des Industries Aérauliques et Thermiques
3. Instituto de Engenharia de Sistemas e Computadores Microsistemas e Nanotecnologias

Contributors

Contact person:

Romieu, Kevin²

Researchers:

Work package leader:

Silverio, Vania³

1. Danish Technological Institute
2. Centre Technique des Industries Aérauliques et Thermiques
3. Instituto de Engenharia de Sistemas e Computadores Microsistemas e Nanotecnologias

This document describes the documented example performed at CETIAT to demonstrate the application of leakage and burst pressure test protocols developed under task A1.2.

Activity number: A1.2.3

Activity description: Using input from A1.1.2, and based on results of stakeholder surveys from A2.1.2, A3.1.1, A4.1.1 and discussions with End-user Advisory Board (A5.1.1), CETIAT, with support from IPQ, DTI, INESC MN, CMI and BHT, will perform a documented example of the test protocol for leakage and burst pressure in flow control performance characteristics developed in A1.2.2. The documented example will be performed in laboratory of CETIAT.

Partners (Lead in bold): CETIAT, IPQ, DTI, INESC MN, CMI, BHT

Files