Published December 3, 2019 | Version 1
Journal article Open

The Effect of Cu-substitution on the microstructure and magnetic properties of Fe-15%Ni alloy prepared by mechanical alloying

Creators

  • 1. Materials Science and Engineering Department, Shahid Bahonar University, Kerman, Iran
  • 2. Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran

Contributors

  • 1. Department of Materials and Metallurgical Engineering, Amirkabir University of Technology, Tehran, Iran

Description

In this study, nanostructured (Fe85Ni15)100-xCux (x = 0, 0.5, 1.5, 3 and 5) powders were synthesized via mechanical alloying process. The obtained phases, microstructure, and magnetic properties of these alloys were studied by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and vibration sample magnetometer (VSM). XRD results indicated that after suitable time of milling, Ni and Cu were homogeneously distributed in the Fe matrix and (bcc) ?-(Fe(Ni-Cu)) solid solution was obtained. It was found that by increasing Cu content in the alloy, work hardening increased, and thus the size of grains decreased while the internal micro strain increased. Also, morphological observations indicated that the addition of Cu led to formation of finer particles. Also, VSM analysis showed that the addition of Cu into Fe-Ni alloys lowered Ms. On the other hand, the coercivity increased by increasing copper content up to 1.5 at. %.

Files

abuchenari (5) PUB.pdf

Files (1.5 MB)

Name Size Download all
md5:403e2c41ab2bf512c1f2ab8572512e54
1.5 MB Preview Download

Additional details

Identifiers

URL
https://dorl.net/dor/20.1001.1.26765837.2019.1.1.4.3

References

  • I. Capek, Nanocomposite Structures and Dispersions, Elsevier Science, USA, 2006.
  • S. Miraghaei, P. Abachi, H. Madaah-Hosseini, A. Bahrami, Characterization of mechanically alloyed Fe100?xSix and Fe83.5Si13.5Nb3 nanocrystalline powders, journal of materials processing technology 203(1-3) (2008) 554-560.
  • J. Jeevanandam, A. Barhoum, Y.S. Chan, A. Dufresne, M.K. Danquah, Review on nanoparticles and nanostructured materials: history, sources, toxicity and regu-lations, Beilstein journal of nanotechnology 9(1) (2018) 1050-1074.
  • M.S. Leila Bazli, Arman Shiravi, A Review of Carbon nanotube/TiO2 Compos-ite prepared via Sol-Gel method Composites and Compounds 1(1) (2019) 1-12.
  • M. Radmansouri, E. Bahmani, E. Sarikhani, K. Rahmani, F. Sharifianjazi, M. Irani, Doxorubicin hydrochloride-Loaded electrospun chitosan/cobalt ferrite/tita-nium oxide nanofibers for hyperthermic tumor cell treatment and controlled drug release, International journal of biological macromolecules 116 (2018) 378-384.
  • V. Balouchi, F.S. Jazi, A. Saidi, Developing (W, Ti) C-(Ni, Co) nanocomposite by SHS method, Journal of Ceramic Processing Research 16(5) (2015) 605-608.
  • A. Masoudian, M. Karbasi, F. SharifianJazi, A. Saidi, Developing Al2O3-TiC in-situ nanocomposite by SHS and analyzingtheeffects of Al content and mechan-ical activation on microstructure, Journal of Ceramic Processing Research 14(4) (2013) 486-491.
  • F. Sharifianjazi, N. Parvin, M. Tahriri, Formation of apatite nano-needles on novel gel derived SiO2-P2O5-CaO-SrO-Ag2O bioactive glasses, Ceramics Interna-tional 43(17) (2017) 15214-15220.
  • Z.B. Jiao, J.H. Luan, M.K. Miller, C.Y. Yu, C.T. Liu, Group precipitation and age hardening of nanostructured Fe-based alloys with ultra-high strengths, scientific reports 6 (2016) 21364.
  • X. Xu, F. Song, X. Hu, A nickel iron diselenide-derived efficient oxygen-evo-lution catalyst, Nature Communications 7(1) (2016) 12324.
  • M. Habibi Jouybari, S. Hosseini, K. Mahboobnia, L.A. Boloursaz, M. Moradi, M. Irani, Simultaneous controlled release of 5-FU, DOX and PTX from chitosan/PLA/5-FU/g-C3N4-DOX/g-C3N4-PTX triaxial nanofibers for breast cancer treat-ment in vitro, Colloids and Surfaces B: Biointerfaces 179 (2019) 495-504.
  • D.M. Matson, Retained free energy as a driving force for phase transformation during rapid solidification of stainless steel alloys in microgravity, npj Micrograv-ity 4(1) (2018) 22.
  • F. He, Z. Wang, Y. Li, Q. Wu, J. Li, J. Wang, C.T. Liu, Kinetic ways of tailor-ing phases in high entropy alloys, Scientific Reports 6 (2016) 34628.
  • K.J. Dusoe, S. Vijayan, T.R. Bissell, J. Chen, J.E. Morley, L. Valencia, A.M. Dongare, M. Aindow, S.-W. Lee, Strong, ductile, and thermally stable Cu-based metal-intermetallic nanostructured composites, Scientific Reports 7(1) (2017) 40409.
  • C. Koch, Top-down synthesis of nanostructured materials: Mechanical and thermal processing methods, Reviews on Advanced Materials Science 5(2) (2003) 91-99.
  • K. Akkouche, A. Guittoum, N. Boukherroub, N. Souami, Evolution of structure, microstructure and hyperfine properties of nanocrystalline Fe50Co50 powders prepared by mechanical alloying, Journal of Magnetism and Magnetic Materials 323(21) (2011) 2542-2548.
  • M.A. Meyers, A. Mishra, D.J. Benson, Mechanical properties of nanocrystal-line materials, Progress in materials science 51(4) (2006) 427-556.
  • B. Zuo, T. Sritharan, Ordering and grain growth in nanocrystalline Fe75Si25alloy, Acta Materialia 53(4) (2005) 1233-1239.
  • R.B. Azhiri, R. Mehdizad Tekiyeh, E. Zeynali, M. Ahmadnia, F. Javidpour, Measurement and evaluation of joint properties in friction stir welding of ABS sheets reinforced by nanosilica addition, Measurement 127 (2018) 198-204.
  • C. Suryanarayana, Mechanical alloying and milling, Progress in materials science 46(1-2) (2001) 1-184.
  • C. Suryanarayana, Inoue, A, Bulk Metallic Glasses, 2nd ed., CRC Press (2018).
  • M.-L. Cui, Y.-S. Chen, Q.-F. Xie, D.-P. Yang, M.-Y. Han, Synthesis, properties and applications of noble metal iridium nanomaterials, Coordination Chemistry Reviews 387 (2019) 450-462.
  • Z.-G. Wang, J.-H. Ouyang, Y.-J. Wang, L.-Y. Xie, Y.-H. Ma, Z.-G. Liu, A. Henniche, Y. Wang, Microstructural characterization of nanostructured Al2O3-ZrO2eutectic layer by laser rapid solidification method, Applied Surface Science 476 (2019) 335-341.
  • A. Rostami, G.A. Bagheri, S.K. Sadrnezhaad, Microstructure and thermody-namic investigation of NiTi system produced by mechanical alloying, Physica B: Condensed Matter 552 (2019) 214-220.
  • T. Sourmail, Near equiatomic FeCo alloys: constitution, mechanical and mag-netic properties, Progress in Materials Science 50(7) (2005) 816-880.
  • L. Nath, G.C. Saha, R. Brüning, Nanocrystalline Al2O3-Ni(Cr) particle synthe-sis by high-energy mechanical alloying method, Journal of Alloys and Compounds 758 (2018) 224-236.
  • A. Esmaeilkhanian, F. Sharifianjazi, A. Abouchenari, A. Rouhani, N. Parvin, M. Irani, Synthesis and Characterization of Natural Nano-hydroxyapatite Derived from Turkey Femur-Bone Waste, Applied Biochemistry and Biotechnology 189(3) (2019) 919-932.
  • A. Moghanian, F. Sharifianjazi, P. Abachi, E. Sadeghi, H. Jafarikhorami, A. Sedghi, Production and properties of Cu/TiO2 nano-composites, Journal of Alloys and Compounds 698 (2017) 518-524.
  • E.H. Jazi, R. Esalmi-Farsani, G. Borhani, F.S. Jazi, Synthesis and Character-ization of In Situ Al-Al13Fe4-Al2O3-TiB2 Nanocomposite Powder by Mechanical Alloying and Subsequent Heat Treatment, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry 44(2) (2014) 177-184.
  • M. Alizadeh, F. Sharifianjazi, E. Haghshenasjazi, M. Aghakhani, L. Rajabi, Production of nanosized boron oxide powder by high-energy ball milling, Synthe-sis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry 45(1) (2015) 11-14.
  • A.S. Wismogroho, W.B. Widayatno, M.I. Amal, Y. Affandi, G.S.T. Sinaga, A. Fitroturokhmah, R. Kusumaningrum, Microstructure transformation of Cr-Al-BN coating on low carbon steel prepared by ball milling method, IOP Conference Series: Materials Science and Engineering 478 (2019) 012004.
  • R.B. Azhiri, J.F. Sola, R.M. Tekiyeh, F. Javidpour, A.S. Bideskan, Analyzing of joint strength, impact energy, and angular distortion of the ABS friction stir welded joints reinforced by nanosilica addition, The International Journal of Advanced Manufacturing Technology 100(9) (2019) 2269-2282.
  • W.L. Johnson, Thermodynamic and kinetic aspects of the crystal to glass transformation in metallic materials, Progress in Materials Science 30(2) (1986) 81-134.
  • C.C. Koch, Processing of metals and alloys, Materials Science and Technology-A Comprehensive Treatment 15 (1991) 193-245.
  • M. Oehring, Z.H. Yan, T. Klassen, R. Bormann, Competition between stable and metastable phases during mechanical alloying and ball milling, physica status solidi (a) 131(2) (1992) 671-689.
  • C.C. Koch, Structural nanocrystalline materials: an overview, Journal of Ma-terials Science 42(5) (2007) 1403-1414.
  • A. Abu-Oqail, A. Wagih, A. Fathy, O. Elkady, A.M. Kabeel, Effect of high energy ball milling on strengthening of Cu-ZrO2 nanocomposites, Ceramics Inter-national 45(5) (2019) 5866-5875.
  • Y. Afkham, R.A. Khosroshahi, R. Taherzadeh Mousavian, D. Brabazon, R. Kheirifard, Microstructural characterization of ball-milled metal matrix nanocom-posites (Cr, Ni, Ti)-25 wt% (Al2O3np, SiCnp), Particulate Science and Technology 36(1) (2018) 72-83.
  • L. Lu, M.O. Lai, Formation of new materials in the solid state by mechanical alloying, Materials & Design 16(1) (1995) 33-39.
  • M.D. Chermahini, S. Sharafi, H. Shokrollahi, M. Zandrahimi, Microstructural and magnetic properties of nanostructured Fe and Fe50Co50 powders prepared by mechanical alloying, Journal of Alloys and Compounds 474(1-2) (2009) 18-22.
  • V. Chaudhary, X. Chen, R.V. Ramanujan, Iron and manganese based magnetocaloric materials for near room temperature thermal management, Progress in Materials Science 100 (2019) 64-98.
  • A.R. Rouhani, A.H. Esmaeil?Khanian, F. Davar, S. Hasani, The effect of agarose content on the morphology, phase evolution, and magnetic properties of CoFe2O4 nanoparticles prepared by sol?gel autocombustion method, International Journal of Applied Ceramic Technology 15(3) (2018) 758-765.
  • A.H. Taghvaei, A. Ebrahimi, M. Ghaffari, K. Janghorban, Investigating the magnetic properties of soft magnetic composites based on mechanically alloyed nanocrystalline Fe–5 wt% Ni powders, Journal of Magnetism and Magnetic Mate-rials 323(1) (2011) 149-155.
  • A. Inoue, T. Zhang, W. Zhang, A. Takeuchi, Bulk Nd–Fe–Al amorphous alloys with hard magnetic properties, Materials Transactions, JIM 37(2) (1996) 99-108.
  • Magnetic neutron scattering, in: Y. Zhu (Ed.), Modern Techniques for Characterizing Magnetic Materials, Springer US, Boston, MA, 2005, pp. 3-64.
  • A. Rathi, V.M. Meka, T.V. Jayaraman, Synthesis of nanocrystalline equiatom-ic nickel-cobalt-iron alloy powders by mechanical alloying and their structural and magnetic characterization, Journal of Magnetism and Magnetic Materials 469 (2019) 467-482.
  • M. Wack, M. Volk, Q. Wei, Magnetic Properties of the Iron–Nickel System: Pressure, Composition, and Grain Size, in: H. Lühr, J. Wicht, S.A. Gilder, M. Holschneider (Eds.), Magnetic Fields in the Solar System: Planets, Moons and So-lar Wind Interactions, Springer International Publishing, Cham, 2018, pp. 383-406.
  • P. Soni, Mechanical alloying: fundamentals and applications, Cambridge Int Science Publishing2000.
  • B.D. Cullity, Elements of X-ray diffraction, Addison, Wesley Mass (1978).
  • G. Williamson, W. Hall, X-ray line broadening from filed aluminium and wol-fram, Acta metallurgica 1(1) (1953) 22-31.
  • S. Takaki, F. Jiang, T. Masumura, T. Tsuchiyama, Correction of Elastic An-isotropy in Williamson-Hall Plots by Diffraction Young's Modulus and Direct Fitting Method, ISIJ International 58(4) (2018) 769-775.
  • A. Khorsand Zak, W.H. Abd. Majid, M.E. Abrishami, R. Yousefi, X-ray anal-ysis of ZnO nanoparticles by Williamson–Hall and size–strain plot methods, Solid State Sciences 13(1) (2011) 251-256.
  • L. Castex, J.-L. Lebrun, G. Maeder, J.-M. Sprauel, Détermination des con-traintes résiduelles par diffraction des rayons X, ENSAM1981.
  • A. Guittoum, A. Layadi, A. Bourzami, H. Tafat, N. Souami, S. Boutarfaia, D. Lacour, X-ray diffraction, microstructure, Mössbauer and magnetization studies of nanostructured Fe50Ni50 alloy prepared by mechanical alloying, Journal of Mag-netism and Magnetic Materials 320(7) (2008) 1385-1392.
  • H.R. Madaah Hosseini, A. Bahrami, Preparation of nanocrystalline Fe–Si–Ni soft magnetic powders by mechanical alloying, Materials Science and Engineer-ing: B 123(1) (2005) 74-79.
  • T.T. Saravanan, S. Kumaran, T.S. Rao, Structural evolution and magnetic properties of mechanically alloyed metastable Fe–Ni–Zr–B system, Materials Let-ters 63(9) (2009) 780-782.
  • S.D. Kaloshkin, V.V. Tcherdyntsev, I.A. Tomilin, Y.V. Baldokhin, E.V. Shelek-hov, Phase transformations in Fe–Ni system at mechanical alloying and conse-quent annealing of elemental powder mixtures, Physica B: Condensed Matter 299(3) (2001) 236-241.
  • A. Djekoun, B. Bouzabata, A. Otmani, J.M. Greneche, X-ray diffraction and Mössbauer studies of nanocrystalline Fe-Ni alloys prepared by mechanical alloy-ing, Catalysis Today 89(3) (2004) 319-323.
  • D.A. Porter, K.E. Easterling, M. Sherif, Phase Transformations in Metals and Alloys, (Revised Reprint), CRC press2009.
  • B. Bhoi, V. Srinivas, V. Singh, Evolution of microstructure and magnetic properties of nanocrystalline Fe70?xCuxCo30 alloy prepared by mechanical alloying, Journal of Alloys and Compounds 496(1-2) (2010) 423-428.
  • J.R. Ares, F. Cuevas, A. Percheron-Guégan, Mechanical milling and subse-quent annealing effects on the microstructural and hydrogenation properties of multisubstituted LaNi5 alloy, Acta Materialia 53(7) (2005) 2157-2167.
  • A. Hossein Taghvaei, A. Ebrahimi, M. Ghaffari, K. Janghorban, Investigating the magnetic properties of soft magnetic composites based on mechanically al-loyed nanocrystalline Fe–5wt% Ni powders, Journal of Magnetism and Magnetic Materials 323(1) (2011) 149-155.
  • S.K. Vajpai, B.V. Mahesh, R.K. Dube, Studies on the bulk nanocrystalline Ni–Fe–Co alloy prepared by mechanical alloying–sintering–hot rolling route, Journal of Alloys and Compounds 476(1) (2009) 311-317.
  • R. Hamzaoui, O. Elkedim, N. Fenineche, E. Gaffet, J. Craven, Structure and magnetic properties of nanocrystalline mechanically alloyed Fe–10% Ni and Fe–20% Ni, Materials Science and Engineering: A 360(1-2) (2003) 299-305.
  • A.H. Bahrami, H. Ghayour, S. Sharafi, Evolution of microstructural and mag-netic properties of mechanically alloyed Fe80?xNi20Six nanostructured powders, Powder Technology 249 (2013) 7-14.
  • D.L. Zhang, Processing of advanced materials using high-energy mechanical milling, Progress in Materials Science 49(3) (2004) 537-560.
  • B. Bhoi, V. Srinivas, V. Singh, Evolution of microstructure and magnetic properties of nanocrystalline Fe70?xCuxCo30 alloy prepared by mechanical alloying, Journal of Alloys and Compounds 496(1) (2010) 423-428.
  • M. Tavakoli, H. Shokrollahi, L. Karimi, K. Janghorban, Investigation of struc-tural, microstructural and magnetic properties of mechanically alloyed nanostruc-tured (Fe50Co50)100?xMox(x=25,35) powders, Powder Technology 234 (2013) 13-18.
  • Y. Shen, H.H. Hng, J.T. Oh, Synthesis and characterization of high-energy ball milled Ni–15%Fe–5%Mo, Journal of Alloys and Compounds 379(1) (2004) 266-271.
  • F.A. Mohamed, A dislocation model for the minimum grain size obtainable by milling, Acta Materialia 51(14) (2003) 4107-4119.
  • B. Chitsazan, H. Shokrollahi, A. Behvandi, M. Ghaffari, Magnetic, structural and micro-structural properties of mechanically alloyed nano-structured Fe-48Co48V4 powder containing inter-metallic Co3V, Journal of Magnetism and Mag-netic Materials 323(9) (2011) 1128-1133.
  • J.M. Greneche, A. ?lawska-Waniewska, About the interfacial zone in nano-crystalline alloys, Journal of Magnetism and Magnetic Materials 215-216 (2000) 264-267.
  • S. Sharma, C. Suryanarayana, Effect of Nb on the glass-forming ability of me-chanically alloyed Fe–Ni–Zr–B alloys, Scripta Materialia 58(6) (2008) 508-511.
  • J.J. Suñol, J.M. Güell, J. Bonastre, S. Alleg, Structural study of nanocrystal-line Fe–Co–Nb–B alloys prepared by mechanical alloying, Journal of Alloys and Compounds 483(1) (2009) 604-607.
  • B.D. Cullity, C.D. Graham, Introduction to magnetic materials, John Wiley & Sons2011.
  • T.D. Shen, R.B. Schwarz, J.D. Thompson, Soft magnetism in mechanically alloyed nanocrystalline materials, Physical Review B 72(1) (2005) 014431.
  • M.P.C. Kalita, A. Perumal, A. Srinivasan, Structure and magnetic properties of nanocrystalline Fe75Si25 powders prepared by mechanical alloying, Journal of Magnetism and Magnetic Materials 320(21) (2008) 2780-2783.
  • A. Antolak, D. Oleszak, M. P?ka?a, T. Kulik, Structure and magnetic properties of mechanically alloyed Ni–Ge and Co–Ge alloys, Materials Science and Engineering: A 449-451 (2007) 440-443.
  • R. Besmel, H. Shokrollahi, Simultaneous variations of microstructure and magnetic properties of Ni58Fe12Zr20B10 nanostructure/amorphous alloy prepared by mechanical alloying, Journal of Magnetism and Magnetic Materials 324(18) (2012) 2829-2835.
  • F. Bødker, S. Mørup, S. Linderoth, Surface effects in metallic iron nanoparticles, Physical Review Letters 72(2) (1994) 282-285.
  • M.E. McHenry, M.A. Willard, D.E. Laughlin, Amorphous and nanocrystal-line materials for applications as soft magnets, Progress in materials Science 44(4) (1999) 291-433.