June 30, 2020 Journal article Open Access

Ajit; Iqbal Ahmed Khan

MARC21 XML Export

<?xml version='1.0' encoding='UTF-8'?>
<record xmlns="http://www.loc.gov/MARC21/slim">
  <leader>00000nam##2200000uu#4500</leader>
  <datafield tag="041" ind1=" " ind2=" ">
    <subfield code="a">eng</subfield>
  </datafield>
  <datafield tag="653" ind1=" " ind2=" ">
    <subfield code="a">2-Hole Offset Probes, S-type Pitot tube coefficients; Wind tunnel test; Stack gas velocity</subfield>
  </datafield>
  <controlfield tag="005">20211004134832.0</controlfield>
  <controlfield tag="001">5547244</controlfield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">Professor &amp; Head, Department of Mechanical  Engineering, Lingaya's Vidyapeeth, Faridabad, Haryana, India</subfield>
    <subfield code="a">Iqbal Ahmed Khan</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">Publisher</subfield>
    <subfield code="4">spn</subfield>
    <subfield code="a">Blue Eyes Intelligence Engineering and Sciences Publication(BEIESP)</subfield>
  </datafield>
  <datafield tag="856" ind1="4" ind2=" ">
    <subfield code="s">1059280</subfield>
    <subfield code="z">md5:c7053a073f9c7dc7099c6258ea33b3ab</subfield>
    <subfield code="u">https://zenodo.org/record/5547244/files/E9669069520.pdf</subfield>
  </datafield>
  <datafield tag="542" ind1=" " ind2=" ">
    <subfield code="l">open</subfield>
  </datafield>
  <datafield tag="260" ind1=" " ind2=" ">
    <subfield code="c">2020-06-30</subfield>
  </datafield>
  <datafield tag="909" ind1="C" ind2="O">
    <subfield code="p">openaire</subfield>
    <subfield code="o">oai:zenodo.org:5547244</subfield>
  </datafield>
  <datafield tag="909" ind1="C" ind2="4">
    <subfield code="c">449-454</subfield>
    <subfield code="n">5</subfield>
    <subfield code="p">International Journal of Engineering and Advanced Technology (IJEAT)</subfield>
    <subfield code="v">9</subfield>
  </datafield>
  <datafield tag="100" ind1=" " ind2=" ">
    <subfield code="u">Tech student, Department of Mechanical Engineering,  Lingaya's Vidyapeeth, Faridabad, Haryana, India.</subfield>
    <subfield code="a">Ajit</subfield>
  </datafield>
  <datafield tag="245" ind1=" " ind2=" ">
    <subfield code="a">Experimental work on the Low Reynolds Number  Behaviour of 2-Hole Offset Probes</subfield>
  </datafield>
  <datafield tag="540" ind1=" " ind2=" ">
    <subfield code="u">https://creativecommons.org/licenses/by/4.0/legalcode</subfield>
    <subfield code="a">Creative Commons Attribution 4.0 International</subfield>
  </datafield>
  <datafield tag="650" ind1="1" ind2="7">
    <subfield code="a">cc-by</subfield>
    <subfield code="2">opendefinition.org</subfield>
  </datafield>
  <datafield tag="650" ind1="1" ind2=" ">
    <subfield code="a">ISSN</subfield>
    <subfield code="0">(issn)2249-8958</subfield>
  </datafield>
  <datafield tag="650" ind1="1" ind2=" ">
    <subfield code="a">Retrieval Number</subfield>
    <subfield code="0">(handle)E9669069520/2020©BEIESP</subfield>
  </datafield>
  <datafield tag="520" ind1=" " ind2=" ">
    <subfield code="a">&lt;p&gt;Whenever a dusty or slurry air passes through the Ltype pitot tube its impurities struck at 900 bend, resulting in the partially choking of the air flow through this device. And eventually its accuracy is decreased with the passage of time. Alternatively, such type of obstruction of the air flow can be avoided by using Stype pitot tube. Keeping this in mind, in the present work we had used S-type pitot tube of diameters ranging from 1.23 mm to 9.54 mm to test against the standard (L-type) pitot tube to control the accuracy of S-type pitot tube co-efficient. An experimental work has been carried out in a simulated wind tunnel environment. The results of the present work showed that there a slight dip over a velocity range of 3 to 14 m/s. Further, it is observed that for higher Reynolds numbers or at higher velocities of the air (more than 14 m/s) the co-efficient performance of S-pitot tube is found almost constant.&lt;/p&gt;</subfield>
  </datafield>
  <datafield tag="773" ind1=" " ind2=" ">
    <subfield code="n">issn</subfield>
    <subfield code="i">isCitedBy</subfield>
    <subfield code="a">2249-8958</subfield>
  </datafield>
  <datafield tag="024" ind1=" " ind2=" ">
    <subfield code="a">10.35940/ijeat.E9669.069520</subfield>
    <subfield code="2">doi</subfield>
  </datafield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">publication</subfield>
    <subfield code="b">article</subfield>
  </datafield>
</record>