Journal article Open Access

Effects of Polypropylene Fibers on the Mechanical Performance of a 3D Printable Mix

Ankit Pal; A.K. Jain

MARC21 XML Export

<?xml version='1.0' encoding='UTF-8'?>
<record xmlns="">
  <datafield tag="041" ind1=" " ind2=" ">
    <subfield code="a">eng</subfield>
  <datafield tag="653" ind1=" " ind2=" ">
    <subfield code="a">Additive Manufacturing,3d Concrete Printing, Free-Form Construction, Polypropylene Fibers, Compressive Strength, Split Tensile Strength And Flexural Strength.</subfield>
  <controlfield tag="005">20210916134821.0</controlfield>
  <controlfield tag="001">5511103</controlfield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">PG Coordinator, Department of Civil and Environmental Engineering, National Institute of Technical Teachers' Training &amp; Research, Bhopal (M.P), India.</subfield>
    <subfield code="a">A.K. Jain</subfield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">Publisher</subfield>
    <subfield code="4">spn</subfield>
    <subfield code="a">Blue Eyes Intelligence Engineering &amp; Sciences Publication (BEIESP)</subfield>
  <datafield tag="856" ind1="4" ind2=" ">
    <subfield code="s">388085</subfield>
    <subfield code="z">md5:fdbfe6af07d41720aebc7417aa2bee0f</subfield>
    <subfield code="u"></subfield>
  <datafield tag="542" ind1=" " ind2=" ">
    <subfield code="l">open</subfield>
  <datafield tag="260" ind1=" " ind2=" ">
    <subfield code="c">2021-06-30</subfield>
  <datafield tag="909" ind1="C" ind2="O">
    <subfield code="p">openaire</subfield>
    <subfield code="o"></subfield>
  <datafield tag="909" ind1="C" ind2="4">
    <subfield code="c">43-46</subfield>
    <subfield code="n">8</subfield>
    <subfield code="p">International Journal of Innovative Technology and Exploring Engineering (IJITEE)</subfield>
    <subfield code="v">10</subfield>
  <datafield tag="100" ind1=" " ind2=" ">
    <subfield code="u">Department of Civil and Environmental Engineering, National Institute of Technical Teachers' Training and Research, Bhopal (M.P), India.</subfield>
    <subfield code="a">Ankit Pal</subfield>
  <datafield tag="245" ind1=" " ind2=" ">
    <subfield code="a">Effects of Polypropylene Fibers on the Mechanical Performance of a 3D Printable Mix</subfield>
  <datafield tag="540" ind1=" " ind2=" ">
    <subfield code="u"></subfield>
    <subfield code="a">Creative Commons Attribution 4.0 International</subfield>
  <datafield tag="650" ind1="1" ind2="7">
    <subfield code="a">cc-by</subfield>
    <subfield code="2"></subfield>
  <datafield tag="650" ind1="1" ind2=" ">
    <subfield code="a">ISSN</subfield>
    <subfield code="0">(issn)2278-3075</subfield>
  <datafield tag="650" ind1="1" ind2=" ">
    <subfield code="a">Retrieval Number</subfield>
    <subfield code="0">(handle)100.1/ijitee.F87750410621</subfield>
  <datafield tag="520" ind1=" " ind2=" ">
    <subfield code="a">&lt;p&gt;Application of automation in construction work has now become need of the hour. Automation in construction work can be done by implementing a technique known as additive manufacturing technique. Use of additive manufacturing in construction sector has the potential to bring fourth industrial revolution by using 3D concrete printers. This paper is based ona parametric experimental study to evaluate the effect of Polypropylene (PP) fibers on mechanical properties of a 3D printable concrete. PP fibers were used invaryingpercentage ratio of 0.02, 0.04, 0.08, 0.12 and 0.16 of binder at constant W/B ratio.&amp;nbsp;&lt;/p&gt;</subfield>
  <datafield tag="773" ind1=" " ind2=" ">
    <subfield code="n">issn</subfield>
    <subfield code="i">isCitedBy</subfield>
    <subfield code="a">2278-3075</subfield>
  <datafield tag="024" ind1=" " ind2=" ">
    <subfield code="a">10.35940/ijitee.F8775.0610821</subfield>
    <subfield code="2">doi</subfield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">publication</subfield>
    <subfield code="b">article</subfield>
Views 22
Downloads 22
Data volume 8.5 MB
Unique views 17
Unique downloads 21


Cite as