Planned intervention: On Wednesday April 3rd 05:30 UTC Zenodo will be unavailable for up to 2-10 minutes to perform a storage cluster upgrade.
Published May 9, 2019 | Version v1
Project deliverable Open

WRF model sensitivity studies and specifications for the NEWA mesoscale wind atlas production runs

  • 1. University Oldenburg - ForWind
  • 2. DTU
  • 3. University of Latvia
  • 4. Fraunhofer IWES
  • 5. Istanbul Technical University
  • 6. CIEMAT, Unversidad Complutense de Madrid
  • 7. Unversidad Complutense de Madrid
  • 8. 3E
  • 9. CIEMAT

Description

This report describes the sensitivity studies performed with the mesoscale model WRF in preparation of the mesoscale wind atlas production runs. The objective of this work was to find a model setup that is not just a best practice setup but well-founded and based on scientific evaluation.

We started with performing some initial sensitivity experiments changing the PBL scheme and the initialisation of the model. The work was distributed among several partners, each conducting the same set of experiments but on a different domain. The objective of this first phase was to ensure that everybody speaks the same language in terms of applying WRF in the context of NEWA. The results were analysed and compared in terms of the mean wind climate. To draw conclusions regarding the quality of the experiments, the results of one domain were compared to tall mast observations. Overall the model showed a good performance with slightly better results for one of the two tested PBL schemes (MYNN) and weekly initialisation of simulations (compared to daily).

In the next phase, further sensitivity tests were conducted for one of the previously defined domains, varying a multitude of parameters as e.g. model version, vertical resolution, forcing data and land surface parameterisation. These studies showed that virtually each parameter change is affecting the results in some way, while significant effects on the wind climate are mostly obtained by changes in physical parameterisation e.g. PBL scheme, representation of the land surface and surface roughness. However, also non-physical parameters as the simulation length and the domain size affects the results considerably. The results suggest to use rather small domains and not too long simulations (in the order of 1–2 weeks).

One of the objectives of NEWA is to create a probabilistic wind atlas, i.e. to provide uncertainty information to the mesoscale wind atlas (see Deliverables D3.1 and D4.4). This will be achieved by generating an ensemble of WRF simulations with different model configurations. While the final ensemble to be run over the complete NEWA domain will only include a few members, a much larger ensemble was run for a smaller sub-domain to find the ensemble members that generate the largest spread and will be used in the final NEWA ensemble. A second objective of this initial large ensemble was to find an optimal setup for the mesoscale production run. Based on the experience gained in the previous sensitivity experiments, a 47-member ensemble was assembled and run. The individual members were compared against each other, as well as against tall mast observations. Different metrics were explored to assess the performance of the members, i.e. not only the usual statistical measures as RMSE, BIAS and correlation but also metrics that compare the wind speed distributions.

In the final part of this report we present the ultimate WRF setup for the NEWA production run that was run between August 2018 and March 2019 on the MareNostrum supercomputer in Barcelona.

Files

2019_05_09_NEWA_D4_3_final.pdf

Files (32.6 MB)

Name Size Download all
md5:544c16a8996b3980b7d90281bc788d56
32.6 MB Preview Download

Additional details

Funding

NEWA – New European Wind Atlas Joint Programme 618122
European Commission