Journal article Open Access

Design and characterization of textured surfaces for applications in the food industry

Gianmarco Lazzini; Luca Romoli; Liam Blunt; Laura Gemini


MARC21 XML Export

<?xml version='1.0' encoding='UTF-8'?>
<record xmlns="http://www.loc.gov/MARC21/slim">
  <leader>00000nam##2200000uu#4500</leader>
  <datafield tag="540" ind1=" " ind2=" ">
    <subfield code="u">https://creativecommons.org/licenses/by/4.0/legalcode</subfield>
    <subfield code="a">Creative Commons Attribution 4.0 International</subfield>
  </datafield>
  <datafield tag="260" ind1=" " ind2=" ">
    <subfield code="c">2017-12-06</subfield>
  </datafield>
  <controlfield tag="005">20200120173344.0</controlfield>
  <controlfield tag="001">2583621</controlfield>
  <datafield tag="909" ind1="C" ind2="O">
    <subfield code="p">openaire</subfield>
    <subfield code="o">oai:zenodo.org:2583621</subfield>
  </datafield>
  <datafield tag="520" ind1=" " ind2=" ">
    <subfield code="a">&lt;p&gt;The aim of this work is to design, manufacture and characterize surface morphologies on AISI 316L stainless steel produced by a custom designed laser-texturing strategy. Surface textures were characterized at a micrometric dimension in terms of areal parameters compliant with ISO 25178, and correlations between these parameters and processing parameters (e.g. laser energy dose supplied to the material, repetition rate of the laser pulses and scanning velocity) were investigated. Preliminary efforts were devoted to the research of special requirements for surface morphology that, according to the commonly accepted research on the influence of surface roughness on cellular adhesion on surfaces, should discourage the formation of biofilms. The topographical characterization of the surfaces was performed with a coherence scanning interferometer. This approach showed that increasing doses of energy to the surfaces increased the global level of roughness as well as the surface complexity. Moreover, the behavior of the parameters&amp;nbsp;&lt;em&gt;S&lt;/em&gt;&amp;nbsp;&lt;sub&gt;pk&lt;/sub&gt;,&amp;nbsp;&lt;em&gt;S&lt;/em&gt;&amp;nbsp;&lt;sub&gt;vk&lt;/sub&gt;&amp;nbsp;also indicates that, due to the ablation process, an increase in the energy dose causes an average increase in the height of the highest peaks and in the depth of the deepest dales. The study of the density of peaks&amp;nbsp;&lt;em&gt;S&lt;/em&gt;&amp;nbsp;&lt;sub&gt;pd&lt;/sub&gt;&amp;nbsp;showed that none of the surfaces analyzed here seem to perfectly match the conditions dictated by the theories on cellular adhesion to confer anti-biofouling properties. However, this result seems to be mainly due to the limits of the resolving power of coherence scanning interferometry, which does not allow the resolution of sub-micrometric features which could be crucial in the prevention of cellular attachment.&lt;/p&gt;</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">University of Parma</subfield>
    <subfield code="a">Luca Romoli</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">University of Huddersfield</subfield>
    <subfield code="a">Liam Blunt</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">ALPhANOV, Institut d'Optique d'Aquitaine</subfield>
    <subfield code="a">Laura Gemini</subfield>
  </datafield>
  <datafield tag="856" ind1="4" ind2=" ">
    <subfield code="s">3968152</subfield>
    <subfield code="z">md5:3c388ab0f4afd636654b5688fadee9fe</subfield>
    <subfield code="u">https://zenodo.org/record/2583621/files/LGE_STMP2017.pdf</subfield>
  </datafield>
  <datafield tag="542" ind1=" " ind2=" ">
    <subfield code="l">open</subfield>
  </datafield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">publication</subfield>
    <subfield code="b">article</subfield>
  </datafield>
  <datafield tag="100" ind1=" " ind2=" ">
    <subfield code="u">University of Parma</subfield>
    <subfield code="a">Gianmarco Lazzini</subfield>
  </datafield>
  <datafield tag="041" ind1=" " ind2=" ">
    <subfield code="a">eng</subfield>
  </datafield>
  <datafield tag="024" ind1=" " ind2=" ">
    <subfield code="a">10.1088/2051-672X/aa939f</subfield>
    <subfield code="2">doi</subfield>
  </datafield>
  <datafield tag="024" ind1=" " ind2=" ">
    <subfield code="q">alternateidentifier</subfield>
    <subfield code="a">https://iopscience.iop.org/article/10.1088/2051-672X/aa939f</subfield>
    <subfield code="2">url</subfield>
  </datafield>
  <datafield tag="245" ind1=" " ind2=" ">
    <subfield code="a">Design and characterization of textured surfaces for applications in the food industry</subfield>
  </datafield>
  <datafield tag="536" ind1=" " ind2=" ">
    <subfield code="c">687613</subfield>
    <subfield code="a">High ThRoughput lasEr texturing of Self-CLEANing and antibacterial surfaces</subfield>
  </datafield>
  <datafield tag="650" ind1="1" ind2="7">
    <subfield code="a">cc-by</subfield>
    <subfield code="2">opendefinition.org</subfield>
  </datafield>
</record>
85
72
views
downloads
Views 85
Downloads 72
Data volume 285.7 MB
Unique views 75
Unique downloads 66

Share

Cite as