Modeling of Phosphorous Acid Fuel Cell in PSCAD
Creators
- 1. Engineering & Technology Department, Vaughn College of Aeronautics and Technology, East Elmhurst, NY, USA
- 2. Electrical & Computer Engineering Department, Texas Tech University, Lubbock, Texas, USA
Description
The renewable energy sources, such as wind, fuel cells, etc. are gaining more attention due to the increase in energy demand as well as being environmental kindly. A dynamic model of Phosphorous Acid Fuel Cell is modeled and simulated using PSCAD/EMTDC. The system consists of a fuel cell stack along with 3-phase Pulse-Width Modulator (PWM) inverter, LCL filter and step-up transformer connected to the main grid. A Real-Reactive power controller is implemented into the 3-phase PWM inverter to control and stabilize the active and reactive power flow onto the main grid. A LCL filter is connected to the inverter side, which eliminates the ultra-harmonic distortions of the frequency. The effect of the Line-Ground, Line-Line, etc. faults on the performance of the main grid’s output voltage is analyzed and studied. The fuel cell is connected to the main grid and the simulation results contain the analysis at different stages of the simulation.
Notes
Files
361 Modeling of Phosphorous Acid Fuel Cell in PSCAD FINAL.pdf
Files
(1.1 MB)
Name | Size | Download all |
---|---|---|
md5:5a5e8353bed976ad60c0cba504e97a74
|
1.1 MB | Preview Download |
Additional details
Related works
- Is cited by
- 10.21276/ijre.2018.5.9.6 (DOI)