Planned intervention: On Wednesday April 3rd 05:30 UTC Zenodo will be unavailable for up to 2-10 minutes to perform a storage cluster upgrade.
Published May 2, 2018 | Version v1
Journal article Open

Geomechanical Principles of Hydraulic Fracturing Method in Unconventional Gas Reservoirs

  • 1. Petroleum Engineers/Lecturers, Department of Petroleum Engineering, Federal University of Technology, Owerri, Imo State, Nigeria
  • 2. Petroleum Engineer / Lecturer, Department of Geology, University of Port Harcourt, Port-Harcourt, Rivers State, Nigeria

Description

Unconventional gas production from shale formation is not new to oil and gas experts worldwide. But our research work was built around hydraulic fracturing technique with focus on the Perkins Kern-Nordgren (PKN) 1972 hydraulic fracturing model(s). It is a very robust and flexible model that can be used on two major shale reservoirs (with the assumption of a fixed height and fracture fluid pressure). The essence was to compare detailed geo-mechanical parameters extracted from wire-line logs with Perkin-C model to select the right well as candidate for simulation. It aided in the prediction production of shale gas from tight shale formations. These also helped in reviewing safe and economical ways of obtaining clean energy sources. Based on similarities in well and formation properties our research team subjected IDJE-2 well (located in the Agbada shale Formation of Niger Delta, Nigeria) to various conditions, equations and assumptions proposed by the study model while also validating our results with the PENOBSCOT L-30 well, located in Canada (with existing profound results from stimulations). The PENOBSCOT L-30 well (Case 1) and IDJE-2 well (Case 2) were both subjected to same conditions, equations and assumptions as applicable to the study model to enable us compare and evaluate stimulation performances. But both cases tend to react differently. However the fluid behavior at constant injection time increases at about 99.64%. Whereas, the maximum width at wellbore shows that a constant increase of fracture width will yield an increase in propant permeability, tensile strength and Poisson’s ratio for Case 1 & 2. Our research results show how rock properties can affect fracture geometry and expected production rates from stimulated shale reservoir formations.

Files

Geomechanical Principles of Hydraulic Fracturing Method in Unconventional Gas Reservoirs.pdf