Journal article Open Access

Electron-beam lithography with the scanning tunneling microscope

Marrian, Christie R. K.


Citation Style Language JSON Export

{
  "DOI": "10.1116/1.585978", 
  "author": [
    {
      "family": "Marrian, Christie R. K."
    }
  ], 
  "issued": {
    "date-parts": [
      [
        1992, 
        11, 
        1
      ]
    ]
  }, 
  "abstract": "The scanning tunneling microscope (STM), operated in vacuum in the field emission mode, has been used in lithographic studies of the resist SAL\u2010601 from Shipley. Patterns have been written by raising the tip\u2013sample voltage above \u221212 V while operating the STM in the constant current mode. Resist films, 50 nm thick, have been patterned and the pattern transferred into the GaAs substrate by reactive ion etching. The variation of feature size with applied dose and tip\u2013sample bias voltage has been studied. Comparisons have been made to lithography with a 10 nm, 50 kV electron e\u2010beam in a JEOL JBX\u20105DII in the same resist thickness films. In all cases the resist films were processed in the standard fashion before and after exposure. The STM can write smaller minimum features sizes and has a greater process latitude. Proximity effects are absent due to the reduced scattering range of the low energy primary electrons. However, the writing speed is slower, being limited by the response of the piezoelectric scanner. Advances have been made recently in the construction of fast STMs which scan at video rates making the STM comparable in speed to the JEOL for nanolithography. The development of ultralow voltage e\u2010beam lithography based on STM technology is discussed.", 
  "title": "Electron-beam lithography with the scanning tunneling microscope", 
  "type": "article-journal", 
  "id": "1236102"
}
39
52
views
downloads
Views 39
Downloads 52
Data volume 49.9 MB
Unique views 37
Unique downloads 50

Share

Cite as