Journal article Open Access

Micromechanics of the internal bond in wood plastic composites: integrating measurement and modeling

Schwarzkopf, Matthew; Muszyński, Lech; Hammerquist, Chad C.; Nairn, John A.


MARC21 XML Export

<?xml version='1.0' encoding='UTF-8'?>
<record xmlns="http://www.loc.gov/MARC21/slim">
  <leader>00000nam##2200000uu#4500</leader>
  <datafield tag="041" ind1=" " ind2=" ">
    <subfield code="a">eng</subfield>
  </datafield>
  <datafield tag="653" ind1=" " ind2=" ">
    <subfield code="a">wood</subfield>
  </datafield>
  <datafield tag="653" ind1=" " ind2=" ">
    <subfield code="a">digital image correlation</subfield>
  </datafield>
  <datafield tag="653" ind1=" " ind2=" ">
    <subfield code="a">strain</subfield>
  </datafield>
  <controlfield tag="005">20190409132921.0</controlfield>
  <datafield tag="500" ind1=" " ind2=" ">
    <subfield code="a">https://link.springer.com/content/pdf/10.1007%2Fs00226-017-0934-5.pdf</subfield>
  </datafield>
  <controlfield tag="001">1149755</controlfield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">Department of Wood Science and EngineeringOregon State University, Corvallis, USA</subfield>
    <subfield code="a">Muszyński, Lech</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">Department of Wood Science and EngineeringOregon State University, Corvallis, USA</subfield>
    <subfield code="a">Hammerquist, Chad C.</subfield>
  </datafield>
  <datafield tag="700" ind1=" " ind2=" ">
    <subfield code="u">Department of Wood Science and EngineeringOregon State University, Corvallis, USA</subfield>
    <subfield code="a">Nairn, John A.</subfield>
  </datafield>
  <datafield tag="856" ind1="4" ind2=" ">
    <subfield code="s">2760591</subfield>
    <subfield code="z">md5:e7ecb3e527cc4be1bc2eb992a0c0b07c</subfield>
    <subfield code="u">https://zenodo.org/record/1149755/files/10.1007-s00226-017-0934-5.pdf</subfield>
  </datafield>
  <datafield tag="542" ind1=" " ind2=" ">
    <subfield code="l">open</subfield>
  </datafield>
  <datafield tag="260" ind1=" " ind2=" ">
    <subfield code="c">2017-06-28</subfield>
  </datafield>
  <datafield tag="909" ind1="C" ind2="O">
    <subfield code="p">openaire</subfield>
    <subfield code="p">user-innorenew</subfield>
    <subfield code="o">oai:zenodo.org:1149755</subfield>
  </datafield>
  <datafield tag="100" ind1=" " ind2=" ">
    <subfield code="u">Inno</subfield>
    <subfield code="0">(orcid)0000-0002-6544-1400</subfield>
    <subfield code="a">Schwarzkopf, Matthew</subfield>
  </datafield>
  <datafield tag="245" ind1=" " ind2=" ">
    <subfield code="a">Micromechanics of the internal bond in wood plastic composites: integrating measurement and modeling</subfield>
  </datafield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">user-innorenew</subfield>
  </datafield>
  <datafield tag="536" ind1=" " ind2=" ">
    <subfield code="c">739574</subfield>
    <subfield code="a">Renewable materials and healthy environments research and innovation centre of excellence</subfield>
  </datafield>
  <datafield tag="540" ind1=" " ind2=" ">
    <subfield code="u">http://creativecommons.org/licenses/by-nc-nd/4.0/legalcode</subfield>
    <subfield code="a">Creative Commons Attribution Non Commercial No Derivatives 4.0 International</subfield>
  </datafield>
  <datafield tag="650" ind1="1" ind2="7">
    <subfield code="a">cc-by</subfield>
    <subfield code="2">opendefinition.org</subfield>
  </datafield>
  <datafield tag="520" ind1=" " ind2=" ">
    <subfield code="a">&lt;p&gt;In this study, an integrated approach combining experimental measurements and numerical modeling was used for characterization of load transfer in the wood/matrix interface in wood plastic composites (WPCs). The experimental methodology was based on optical measurement of surface displacements and strains in model WPC specimens subjected to tensile loads. The model specimens consisted of thin HDPE films with single embedded wood particles. The optical measurement of surface strains was based on the digital image correlation principle. The material point method was used for morphology-based numerical modeling of the loaded specimens. The exact location and morphology of the embedded particle determined by X-ray computed tomography were used as input for the numerical model. Imperfect interface characteristics, reflecting the efficiency of the load transfer through the interface in the numerical model of the composite, were determined using inverse problem methods. Good agreement was obtained between the simulated and measured strain maps determined on a number of specimens including particles with various orientations to the loading direction using the same values of interface parameters.&lt;/p&gt;</subfield>
  </datafield>
  <datafield tag="773" ind1=" " ind2=" ">
    <subfield code="n">issn</subfield>
    <subfield code="i">isDocumentedBy</subfield>
    <subfield code="a">1432-5225</subfield>
  </datafield>
  <datafield tag="773" ind1=" " ind2=" ">
    <subfield code="n">issn</subfield>
    <subfield code="i">isDocumentedBy</subfield>
    <subfield code="a">0043-7719</subfield>
  </datafield>
  <datafield tag="024" ind1=" " ind2=" ">
    <subfield code="a">10.1007/s00226-017-0934-5</subfield>
    <subfield code="2">doi</subfield>
  </datafield>
  <datafield tag="980" ind1=" " ind2=" ">
    <subfield code="a">publication</subfield>
    <subfield code="b">article</subfield>
  </datafield>
</record>
55
59
views
downloads
Views 55
Downloads 59
Data volume 162.9 MB
Unique views 53
Unique downloads 57

Share

Cite as