Journal article Open Access
Oke Oktavianty; Tadayuki Kyoutani; Shigeyuki Haruyama; Ken Kaminishi
For advancing the experiment system standard of Inkjet printer that is being developed, the actual natural period, fire limitation number in droplet weight measurement and observation distance in droplet velocity measurement was investigated. In another side, the study to control the droplet volume in inkjet printer with negative actuating waveform method is still limited. Therefore, the effect of negative waveform with preliminary and suppressing vibration addition on the droplet formation process, droplet shape, volume and velocity were evaluated. The different voltage and print-head temperature were exerted to obtain the optimum preliminary and suppressing vibration. The mechanism of different phenomenon from each waveform was also discussed.
Chung, W.H., "Study of Micro-Droplet Behavior for a Piezoelectric Inkjet Printing Device Using a Single Pulse Voltage Pattern", Materials Transactions, Vol. 45, No. 5 pp. 1794-801, 2004.
Gan et al., "Reduction of Droplet Volume by Controlling Actuating Waveforms in Inkjet Printing for Micro-pattern Formation", J. Micromech. Microeng. 19, 055010 (8pp), 2009.  Xu, C. et al., "Electric Field-assisted Droplet Formation Using Piezoactuation-based drop-on demand Inkjet Printing", Journal of Micromechanics and Microengineering 24,115011 (9pp), 2014.  Ioana S., "A New Viscosity-Temperature Relationship for Vegetable Oil" Journal of Petroleum Technology and Alternative Fuels Vol. 3(2), pp. 19-23, 2012.  Singh, R.N., and Sommer, F., "Viscosity of Liquid Alloys: Generalization of Andrade's Equation" Monatsh Chem, 143:1235–1242 Springer-Verlag, 2012.  E. P. Furlani, "Fluid Mechanics for Inkjet Printing," Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets, ed. S. D. Hoath, Wiley pp. 13-56, 2016.  Wijshoff, H., "Drop Formation Mechanism in Piezo-acoustic Inkjet", NSTI-Nanotech Vol. 3, 2007.  Kim, B.H et al., "Dynamic characteristics of a piezoelectric driven inkjet printhead fabricated using MEMS technology", Sensors and Actuators A 173, pp 244-253, Elsevier, 2011.  Gan et al., "Reduction of droplet volume by controlling actuating waveforms in inkjet printing for micro-pattern formation", J. Micromech. Microeng. 19 (2009) 055010 (8pp).  Shin, P. et.al., "Control of Droplet Formation for Low Viscosity Fluid by Double Waveforms Applied to a Piezoelectric Inkjet Nozzle", Microelectronics Reliability 51, pp 797-804, Elsevier Ltd, 2011.  Jiuan Lin, H., et al., "The Effects of Operating Parameters on Micro-Droplet Formation in a Piezoelectric Inkjet Printhead Using Double Pulses Voltage Pattern, Material Transactions, Vol. 47, No. 2, pp 375-382, Japan Institute of Metal, 2006.  Khalate, A.A., et al, "A Waveform Design Method for a Piezo Inkjet Print-head Based on Robust Feedforward Control", Journal of Microelectromechanical Systems, Vol. 21No. 6, pp 1365-1374, 2012.  Hsiu M. and Hwang W.S., "Effects of Pulse Voltage on the Droplet Formation of Alcohol and Ethylene Glycol in a Piezoelectric Inkjet Printing Process with Bipolar Pulse", Material Transactions, Vol. 49, No. 2, pp. 331-338, 2008.  Liou, T.M., et. al., "Effects of actuating waveform, ink property, and nozzle size on piezoelectrically driven inkjet droplets", Microfluid Nanofluid, pp 575-586, Springer, 2010.  Lin Tsai, H., et.al, "Fabrication of Microdots Using Piezoelectric Dispensing Technique for Viscous Fluids", Material Journals, Vol 8 (10), 2015.  Shyng Leu, T., et.al., "Experimental Study of Meniscus Dynamic Behaviors in Squeeze- Mode Piezoelectric Inkjet Printhead", Material Science Forum Vol. 594, pp 155-162, Trans Tech Publication, 2008.  Xu, C et al., "Study of Droplet Formation Process during Drop-on-Demand Inkjetting of Living Cell-Laden Bioink", American Chemical Society, pp 9130 – 9138, 2014.  Martin, G.D., et.al., "Inkjet Printing – The Physic of Manipulating Liquid Jets and Drops", Journal of Physics: Conference Series 105, IOP Publishing Ltd, 2008.  Chen, A.U., and Basara, O.A," A New Method for Significantly Reducing Drop Radius without Reducing Nozzle Radius in Drop-on-Demand Drop Production", Physics of Fluids Vol. 14 No. 1, 2002.  Liou, T.M.,"Three-Dimensional Simulations of the Droplet Formation during the Inkjet Printing Process", Int.Comm.Heat Mass Transfer, Vol. 29, No. 8, pp. 1109-1118, 2002.  Dong, H. and Carr, W.W., "An Experimental Study of Drop-on-Demand Drop Formation", Physics of Fluids 18, 072102, 2006.  Smith, P.J. and Stringer, J., "Application in Inkjet Printing"," Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets, ed. Hoath, SD., Wiley pp 397- 414, 2016.  Kwon, K.S., "Vision Monitoring", in "Inkjet based Micromanufacturing, pp127-144, Wiley VCH, 2012.  Verkounteren, R.M, et.al, "Inkjet Metrology: High Accuracy Mass Measurement of Microdroplets Produced by Drop-on-Demand Dispenser", Analytical Chemistry, Vol. 81, No. 20, pp 8577-8584, 2009.  Kwon, K.S., et.al, "Jetting Frequency and Evaporation Effects on the Measurement Accuracy of Inkjet Droplet Amount, Journal of Imaging Science and Technology, 59(2), 2015.
Kim et al., Development of Inkjet Nozzle Driven by Double Piezo Actuators", ISFV15, 2012.
Kwon, K. & Kim, W., "A Waveform Design Method for High Speed Inkjet Printing Based on Self-Sensing Measurement", Sensor and Actuators A 140, pp 75-83, 2007.
Kwon, K., "Waveform Design Methods for Piezo Inkjet Dispensers based on Measured Meniscus Motion", Journal of Microelectromechanical Systems, Vol. 18 No. 5, 2009.
Shin, P. et al.," Control of Droplet Formation for Low Viscosity Fluid by Double Waveforms Applied to a piezoelectric Inkjet Nozzle", Microelectrics Reliability 51, pp 797 – 804, 2011.
Stephen D. Hoath," Fundamentals of Inkjet Printing", Wiley-VCH, 2016.
Szczech et al., "Fine-Line Conductor Manufacturing Using Drop-On-Demand PZT Printing Technology" IEEE Transactions on Electronics Packaging Manufacturing, vol. 25, no. 1, 2002.
Van der Meulen, M.J, "Meniscus Motion and Drop Formation in Inkjet Printing", Thesis, Physics of Fluids, University of Twente, Netherlands, 2014.