Numerical Study of a Butterfly Valve for Vibration Analysis and Reduction
Description
This work presents a Computational Fluid Dynamics
(CFD) simulation of a butterfly valve used to control the flow of
combustible gas mixture in an industrial process setting.The work
uses CFD simulation to analyze the flow characteristics in the
vicinity of the valve, including the pressure distributions and
Frequency spectrum of the pressure pulsations downstream the valves
and the vortex shedding allow predicting the torque fluctuations
acting on the valve shaft and the possibility of generating mechanical
vibration and resonance.These fluctuations are due to aerodynamic
torque resulting from fluid turbulence and vortex shedding in the
valve vicinity.
The valve analyzed is located in a pipeline between two opposing
90o elbows, which exposes the valve and the surrounding structure to
the turbulence generated upstream and downstream the elbows at
either end of the pipe.CFD simulations show that the best location for
the valve from a vibration point of view is in the middle of the pipe
joining the elbows.
Files
9999876.pdf
Files
(570.0 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:8ac5defebece70618582cd2c43f47e85
|
570.0 kB | Preview Download |
Additional details
References
- T. Tanakaand T Kimura., "Hydrodynamic characteristics of a butterfly valve-Prediction of pressure loss characteristic," ISA Transactions, pp. 319-326, 1995.
- S. Y. Jeon , J. Y. Yoon and M. S, Shin"Flow characteristics and performance evaluation of butterfly valves using numerical analysis," in 25th IAHR Symposium on Hydraulic Machinery and Systems, 2010.
- F. Danbonand C. Solliec, "Aerodynamic torque of a butterfly valve influence of an elbow on the time-mean and instantaneous aerodyna torque," ASME JFE, vol. 122, pp. 337-344, 2000.
- ANSYS Inc (2009), ANSYS FLUET Solver.
- W. Chaiworapuek.,J.Champagne, M. El Hajemand C. Kittichaikan C.,"An Investigation of the Water Flow Past the Butterfly Valve," AIP Conference Proceedings,1225, pp. 249–262, 2010.
- W. Feng,, G.Xiao and L. Song, "Numerical Simulation of the Flow Field to the Double Eccentric Butterfly Valve and Performance Prediction, " In Power and Energy Engineering Conference, pp. 1
- Z. Leutwyler and C. Dalton,"A CFD study to an torque, lift, and drag forces for a butterfly valve in the mid position", ASME Heat Transfer/Fluids Engineering Summer Conference, North Carolina, pp 1-9, 2004.
- A.Hasan, M.Mamun, S. Matsuo S. andT.Setoguchi.,"A computational study of transonic moist air flow around a symmetric disk butterfly valve". International Conference on Mechanical Engineering, Dhaka, pp 1-6, 2009.
- Z Leutwyler,, and C. Dalton, "A Computational Study of Torque and Forces Due to Compressible Flow on a Butter Stroke Position",J. Fluids Engineering, 128(5), pp. 1074 [10] X. Song, L. Wang,., and Y. Park, " Fluid and Structural Analysis of Large Buttery Valve," AIP Conference Proceedings, 1052, pp. 311 2008.