Analysis of Capillary Coating Die Flow in an Optical Fiber Coating Applicator
Creators
Description
Viscous heating becomes significant in the high speed resin coating process of glass fibers for optical fiber manufacturing. This study focuses on the coating resin flows inside the capillary coating die of optical fiber coating applicator and they are numerically simulated to examine the effects of viscous heating and subsequent temperature increase in coating resin. Resin flows are driven by fast moving glass fiber and the pressurization at the coating die inlet, while the temperature dependent viscosity of liquid coating resin plays an important role in the resin flow. It is found that the severe viscous heating near the coating die wall profoundly alters the radial velocity profiles and that the increase of final coating thickness by die pressurization is amplified if viscous heating is present.
Files
13812.pdf
Files
(220.4 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:fce1b475584deca77b71aac6be20da58
|
220.4 kB | Preview Download |
Additional details
References
- M. Makinen, "A test facility for enhanced fiber drawing process development," in Communications Cabling, A. L. Harmer, Ed. IOP Press, 1997, pp. 65-71.
- K. Kim, H. S. Kwak, S. H. Park, and Y. S. Lee, "Theoretical prediction on double-layer coating in wet-on-wet optical fiber coating process," J. Coat. Technol. Res., vol. 8, no. 1, pp. 35-44, 2011.
- S. R. Schmid and A. F. Toussaint, "Optical fiber coatings," in Specialty Optical Fiber Handbook, A. Mendez and T. Morse, Ed. Academic Press, 2007, pp. 95-122.
- U. C. Paek and C. M. Schroeder, "High speed coating of optical fibers with UV curable materials at a rate of greater than 5 m/sec," Appl. Opt., vol. 20, no. 23, pp. 4028-4043, 1981.
- A. Panoliaskos, W. L. H. Hallett, and I. Garis, "Prediction of optical fiber coating thickness," Appl. Opt., vol. 24, no. 15, pp. 2309-2312, 1985.
- N. Orita, P. Hasloev, and F. Pedersen, "Optical fiber manufacturing method and optical fiber manufacturing apparatus," U.S. Patent Pub. No. US2009/0145168, 2009.
- P. G. Simpkins and V. J. Kuck, "On air entrainment in coatings," J. Colloid Interface Sci., vol. 263, no. 2, pp. 562-571, 2003.
- K. Kim, H. S. Kwak, and J. S. Choi, "A computational investigation of thermal effects on resin coating flows in an optical fiber drawing system," in Proc. 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies, Singapore, 2011, vol. 2, pp. 510-514.
- S. Sakaguchi and T. Kimura, "High-speed drawing of optical fibers with pressurized coating." J. Lightwave Technol., vol. LT-3, no. 3, pp. 669-673, 1985. [10] A. Yang, X. M. Tao, and X. Y. Cheng, "Prediction of fiber coating via liquid-phase process." J. Mater. Process. Technol., vol. 202, no. 1-3, pp. 365-373, 2008. [11] K. Ratten and Y. Jaluria, "Simulation of the flow in a coating applicator for optical fiber manufacture," Comput. Mech., vol. 31, no. 5, pp. 428-436, 2003. [12] S.-Y. Yoo and Y. Jaluria, "Isothermal flow in an optical fiber coating applicator and die system," J. Lightwave Technol., vol. 24, no. 1, pp. 449-463, 2006. [13] S.-Y. Yoo and Y. Jaluria, "Fluid flow and heat transfer in an optical fiber coating process," Int. J. Heat Mass Transfer, vol. 50, no. 5-6, pp. 1176-1185, 2007.