Journal article Open Access

# Effect of Mixing Process on Polypropylene Modified Bituminous Concrete Mix Properties

Noor Zainab Habib; Ibrahim Kamaruddin; Madzalan Napiah; Isa Mohd Tan

### Dublin Core Export

<?xml version='1.0' encoding='utf-8'?>
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:creator>Noor Zainab Habib</dc:creator>
<dc:creator>Ibrahim Kamaruddin</dc:creator>
<dc:creator>Isa Mohd Tan</dc:creator>
<dc:date>2011-10-26</dc:date>
<dc:description>This paper presents a research conducted to investigate the effect of mixing process on polypropylene (PP) modified bitumen mixed with well graded aggregate to form modified bituminous concrete mix. Two mode of mixing, namely dry and wet with different concentration of polymer polypropylene was used with 80/100 pen bitumen, to evaluate the bituminous concrete mix properties. Three percentages of polymer varying from 1-3% by the weight of bitumen was used in this study. Three mixes namely control mix, wet mix and dry mix were prepared. Optimum binder content was calculated considering Marshall Stability, flow, air voids and Marshall Quotient at different bitumen content varying from 4% - 6.5% for control, dry and wet mix. Engineering properties thus obtained at the calculated optimum bitumen content revealed that wet mixing process is advantageous in comparison to dry mixing as it increases the stiffness of the mixture with the increase in polymer content in bitumen. Stiffness value for wet mix increases with the increase in polymer content which is beneficial in terms of rutting. 1% PP dry mix also shows enhanced stiffness, with the air void content limited to 4%.The flow behaviour of dry mix doesn't indicate any major difference with the increase in polymer content revealing that polymer acting as an aggregate only without affecting the viscosity of the binder in the mix. Polypropylene (PP) when interacted with 80 pen base bitumen enhances its performance characteristics which were brought about by altered rheological properties of the modified bitumen. The decrease in flow with the increase in binder content reflects the increase in viscosity of binder which induces the plastic flow in the mix. Workability index indicates that wet mix were easy to compact up to desired void ratio in comparison to dry mix samples.</dc:description>
<dc:identifier>https://zenodo.org/record/1071764</dc:identifier>
<dc:identifier>10.5281/zenodo.1071764</dc:identifier>
<dc:identifier>oai:zenodo.org:1071764</dc:identifier>
<dc:language>eng</dc:language>
<dc:relation>doi:10.5281/zenodo.1071763</dc:relation>
<dc:relation>url:https://zenodo.org/communities/waset</dc:relation>
<dc:rights>info:eu-repo/semantics/openAccess</dc:rights>
<dc:subject>Marshall Flow</dc:subject>
<dc:subject>Marshall Stability</dc:subject>
<dc:subject>Polymer
modified bitumen</dc:subject>
<dc:subject>Polypropylene</dc:subject>
<dc:subject>Stiffness.</dc:subject>
<dc:title>Effect of Mixing Process on Polypropylene Modified Bituminous Concrete Mix Properties</dc:title>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>publication-article</dc:type>
</oai_dc:dc>

33
19
views