Journal article Open Access

Utilization of Agro-Industrial Waste in Metal Matrix Composites: Towards Sustainability

L. Lancaster; M. H. Lung; D. Sujan

The application of agro-industrial waste in Aluminum Metal Matrix Composites has been getting more attention as they can reinforce particles in metal matrix which enhance the strength properties of the composites. In addition, by applying these agroindustrial wastes in useful way not only save the manufacturing cost of products but also reduce the pollutions on environment. This paper represents a literature review on a range of industrial wastes and their utilization in metal matrix composites. The paper describes the synthesis methods of agro-industrial waste filled metal matrix composite materials and their mechanical, wear, corrosion, and physical properties. It also highlights the current application and future potential of agro-industrial waste reinforced composites in aerospace, automotive and other construction industries.

Files (734.6 kB)
Name Size
8782.pdf
md5:328f3a46aebb83737fb8c5bd2adfbc59
734.6 kB Download
  • Abdul Khalil, H.P.S., Fizree, H.M., Jawaid, M. and Omar S.Alattas (2011). "Preparation and Characterization of Nano-Structured Materials from Oil Palm Ash: A Bio-Agricultural Waste from Oil Palm Mill". Nano Ash from Oil Palm, 4537-4546. [10] Rafidah binti Robani and Chan, C.M. 2009. "Reusing Soft Soils with Cement-Palm Oil Clinker (Poc) Stabilisation." International Conference on Engineering and Education in the 21st Century: 1 - 4. gf070002@siswa.uthm.edu.my, chan@uthm.edu.my. [11] Hernández-Salas, J. M., M. S. Villa-RamÃ-rez, J. S. Veloz-Rendón, K. N. Rivera-Hern├â┬índez, R. A. Gonz├â┬ílez-C├â┬®sar, M. A. Plascencia- Espinosa, and S. R. Trejo-Estrada. 2009. "Comparative Hydrolysis and Fermentation of Sugarcane and Agave Bagasse." Bioresource Technology 100 (3): 1238-1245. http://www.sciencedirect.com/science/ article/pii/S0960852407000557. [12] WalfordSn.Sugarcane Bagasse: How Easy Is It to Measure Its Constituents? Proc S Afr Sug Technol Ass; 2008; 81: 266-273. [13] Youn W. Han, Edwin A. Catalano, and Alex Ciegler Chemical and Physical Properties of Sugarcane Bagasse Irradiated with ╬│ Rays. Journal Agricultural Food Chemistry; 1983; 31: 34-38. [14] S.B., Hassan, Oghenevweta E.J.*, and Aigbodion V.S. 2012. "Potentials of Maize Stalk Ash as Reinforcement in Polyster Composites." Journal of Minerals & Materials Characterization & Engineering, Vol. 11, No.4, pp.543-557. [15] Curtu and D. Motoc Luca.2009 "Theoretical and Experimental Approach of multiphase composite materials in DAAAM International Scientific Book", B. Katalinic, Ed. Vienna: DAAAM International Publishing, pp. 349-362 [16] Tavman, I. H.1996 "Thermal and mechanical properties of aluminium powder-filled high density polyethylene composites". Journal of Applied Polymer Science, Vol. 62, pp. 2161- 2167. [17] Anilkumar, H.C., Hebbar, H.S., and Ravishankar, K.S. 2011. "Mechanical Properties of Fly Ash Reinforced Aluminium Alloy (Al6061) Composites." International Journal of Mechanical and Materials Engineering (IJMME) Vol.6 (No.1): 41 - 45. [18] Yoshinori, N. 2003. "Fabrication and recycling of aluminum metal matrix composties". In Metal and Ceramic Matrix Composites: Taylor & Francis. [19] Embury, J. D., 1985. Metal. Trans. A 16, 2191-2200 Elsevier Materials Selector. Vol. 2, UK. , 1997. [20] P.K. Rohatgi, N. Gupta, and Simon Alaraj. Thermal Expansion of Aluminium-Fly Ash Cenosphere Composites Synthesized by Pressure Infiltration Technique, 2005: 1163-1174. [21] Ahmad, M. H., Omar, R. C., Malek, M. A., Md Noor, N., and Thiruselvam, S. n.d. "Compressive Strength of Palm Oil Fuel Ash Concrete." ICCBT2008. [22] Aigbodion V.S., Hassan S.B., Nyior G.B., Ause T. 2010. "Effect of Bagasse Ash Reinforcement on the Wear Behavior of Al-Cu- Mg/Bagasse Ash Particulate Composites." ACTA METALLURGICA SINICA Vol.23 (No.2): 81 - 89. www.amse.org.cn [23] Ramachandra, M. Radhakrishna. "Microstructure, mechanical properties,wear, and corrosion behaviour of Al-Si-fly ash composite." Proquest, 2005: 1337. [24] Apasi, A., Madakson, P.B., Yawas, D.S., and Aigbodion, V.S. 2012. "Wear Behaviour of Al-Si-Fe Alloy/Coconut Shell Ash Particulate Composites." Tribology in Industry Vol. 34, No 36-43. [25] Bashar S. Mohammed, Mohammed A. Al-Ganad, M. Abdullahi. 2011. "Analytical and experimental studies on composite slabs utilising palm oil clinker concrete" Construction and Building Materials - CONSTR BUILD MATER , vol. 25, no. 8, pp. 3550-3560, 2011. [26] Satta, P.and Steve, F. 2011. "New Thermal Insulation Boards Made from Coconut Husk and Bagasse." Energy and Buildings 43: 1732-1739. www.elsevier.com/locate/enbuild. [27] Daoud, A., Abou El-khair, M.T. 2009. "Effect of Fly Ash Addition on the Structure and Compressive Properties of 4032-Fly Ash Particle Composite Foams." Journal of Alloys and Compounds 487 (2009): (618- 625). www.elsevier.com/locate/jallcom.
  • Chanap, Rahul. 2012. "Study of Mechanical and Flexural Properties of Coconut Shell Ash Reinforced Epoxy Composites." National Institute of Technology, Rourkela.
  • Madakson, P.B, Yawas, D.S. and Apasi, A. 2012. "Characterization of Coconut Shell Ash for Potential Utilization in Metal Matrix Composites for Automotive Applications." International Journal of Engineering Science and Technology (IJEST).
  • Md. Safiuddin, Mohd. Zamin Jumaat, M.A. Salam, M.S. Islam, R. Hashim. 2010. "Utilization of Solid Wastes in Construction Materials." International Journal of the Physical Sciences Vol. 5 (13): 1952 - 1963. http://www.academicjournals.org/IJPS.
  • Omaltola, K.M., and A.D. Onojah. 2009. nternational Journal of Physical Sciences, 4, 189.
  • Rajan, T.P.D., Pillai, R.M., Pai, B.C., Satyanarayana, K.G., and Rohatgi, P.K. 2007. "Fabrication and Characterisation of Al-7si- 0.35mg/Fly Ash Metal Matrix Composites Processed by Different Stir Casting Routes." Composites Science and Technology 67: 3369 - 3377. www.elsevier.com/locate/compscitech.
  • Wang, A., and W. Sun. 2003. Cement and Concrete Research, 34, 2057.
  • Zainudin, N.F., Lee,K.T., Kamaruddin, A.H., Bhatia,S., and Mohamed, A.R., 2005. "Study of adsorbent prepared from oil palm ash (OPA) for flue gas desulfurization," Separation and Purification Technology 45(1), 50-60.
  • Zamri, Y.B., Shamsul, J.B., and Amin, M.M. 2011. "Potential of Palm Oil Clinker as Reinforcement in Aluminium Matrix Composites for Tribological Applications." International Journal of Mechanical and Materials Engineering (IJMME) Vol. 6 (No.1): 10 - 17. irmazai07@yahoo.com.my.
0
0
views
downloads
All versions This version
Views 00
Downloads 00
Data volume 0 Bytes0 Bytes
Unique views 00
Unique downloads 00

Share

Cite as