Journal article Open Access

An Efficient Technique for EMI Mitigation in Fluorescent Lamps using Frequency Modulation and Evolutionary Programming

V.Sekar; T.G.Palanivelu; B.Revathi

Electromagnetic interference (EMI) is one of the serious problems in most electrical and electronic appliances including fluorescent lamps. The electronic ballast used to regulate the power flow through the lamp is the major cause for EMI. The interference is because of the high frequency switching operation of the ballast. Formerly, some EMI mitigation techniques were in practice, but they were not satisfactory because of the hardware complexity in the circuit design, increased parasitic components and power consumption and so on. The majority of the researchers have their spotlight only on EMI mitigation without considering the other constraints such as cost, effective operation of the equipment etc. In this paper, we propose a technique for EMI mitigation in fluorescent lamps by integrating Frequency Modulation and Evolutionary Programming. By the Frequency Modulation technique, the switching at a single central frequency is extended to a range of frequencies, and so, the power is distributed throughout the range of frequencies leading to EMI mitigation. But in order to meet the operating frequency of the ballast and the operating power of the fluorescent lamps, an optimal modulation index is necessary for Frequency Modulation. The optimal modulation index is determined using Evolutionary Programming. Thereby, the proposed technique mitigates the EMI to a satisfactory level without disturbing the operation of the fluorescent lamp.

Files (135.6 kB)
Name Size
2816.pdf
md5:17bb64ea56f6d0f3fb9982c6497c2806
135.6 kB Download
  • Hee-Seok Han, Tae-Ha Ryu, and Gyu-Hyeong Cho,"Mixed Mode Excitation and Low Cost Control IC for Electronic Ballast", IEEE Transactions on Power Electronics, vol. 22, no. 3, May 2007.

  • Horacio Vasquez, Laura Espinoza, Karen Lozano, Heinrich Foltz and Shuying Yang, "Simple Device for Electromagnetic Interference Shielding Effectiveness Measurement," IEEE Article, pp. 62-68, 2009.

  • Ibuki Mori, Yoshihisa Yamada, Santhos A. Wibowo, Masashi Kono, Haruo Kobayashi, Yukihiro Fujimura, Nobukazu Takai, Toshio Sugiyama, Isao Fukai, Norihisa Onishi, Ichiro Takeda and Jun- ichi Matsuda, "EMI Reduction by Spread- Spectrum clocking in Digitally- Controlled DC-DC Converters", IEEE Transactions on Fundamentals, vol. E92- A, no. 4, April 2009.

  • Jeyanandh Paramesh and Annette von Jouanne, "Use of Sigma- Delta Modulation to control EMI from Switch- Mode Power Supplies", IEEE Transactions on Industrial Electronics, vol. 48, no. 1, Feb. 2001.

  • K. M. Muttaqi and M. E. Haque, "Electromagnetic Interference Generated from Fast Switching Power Electronic Devices", in proc. of International Journal on Innovations in Energy Systems and Power, vol. 3, no. 1, April 2008.

  • P. Ram Mohan, M. Vijaya Kumar and O.V. Raghava Reddy, "A Novel Topology of EMI Filter to Suppress Common Mode and Differential Mode Noises of Electro Magnetic Interference in Switching Power Supplies", in proc. of ARPN Journal on Engineering and Applied Sciences, vol. 2, no. 4, August 2004.

  • Sam Ben-Yaakov and Moshe Shvartsas, "An Electronic Ballast for Fluorescent Lamps with No Series Passive Elements", in proc. of 16th Annual IEEE Conference on Applied Power Electronics and Exposition, vol. 2, pp: 670- 675, Anaheim, USA, 2001, Doi: 10.1109/APEC.2001.912441.

  • V.Sekar, T.G.Palanivelu and B.Revathi, "Effective Tests and Measurements Mechanisms for EMI Level Identification in Fluorescent Lamp Operation", in proc. of European Journal on Scientific Research, vol. 34, no. 4, pp: 495- 505, 2009. [10] Narasimhan R., Audeh M. D., Kahn J. M., "Effect of electronic-ballast fluorescent lighting on wireless infrared links", IEE proceedings on Optoelectronics, vol. 143, no. 6, pp: 329- 374, 1996. [11] Wei-Der Chang and Jun-Juh Yan, "Optimum Setting of PID Controllers based on using Evolutionary Programming Algorithm", in proc. of Journal on Chinese Institute of Engineers, vol. 27, no. 3, pp: 439- 442, 2004. [12] Raymond Chiong and Ooi Koon Beng, "A comparison between Genetic algorithms and Evolutionary Programming based on Cutting Stock Problem", Engineering Letters, 14:1, 12 Feb. 2007. [13] B. Y. Qu and P. N. Suganthan, "Multi-objective Evolutionary Programming without Non-domination Sorting is up to Twenty Times Faster," IEEE Congress on Evolutionary Computation, 18-21 May, Norway, 2009. [14] Libao Shi, Zhao Yang Dong, Jin Hao and Kit Po Wong, "Mathematical Analysis of the Heuristic Optimisation Mechanism of Evolutionary Programming," International Journal of Computational Intelligence Research, Vol.2, No.4, pp. 357-366, 2006. [15] M.Vidhyavathi and G.Anand, "Industrial Tariff Minimization Using Evolutionary Programming Technique", in proc. of World Academy of Science, Engineering and Technology, 50, 2009. [16] Wan-Rone Liou, Chun-Ting Kuo, Mei-Ling Yeh, Ping-Hsing Chen, and Marynelle L. Z. Rosales, "A Dual-Mode Step-up DC/DC Converter IC with Current-Limiting and EMI Reduction Techniques", in proceedings of Journal on Electronic Science and Technology of China, vol. 6, no. 3, September 2008. [17] Sotirios K. Goudos, Ioannis T. Rekanos and John N. Sahalos,"EMI Reduction and ICs Optimal Arrangement Inside High-Speed Networking Equipment Using Particle Swarm Optimization", IEEE Transactions on Electromagnetic Compatibility, vol. 50, no. 3, August 2008. [18] R.Dhanasekaran, M.Rajaram and S.N.Sivanandam, "Mixed Mode EMI Noise Level Measurements in SMPS", in proceedings of American Journal on Applied Sciences, vol. 3, no. 5, pp: 1824- 1830, 2006. [19] Julia Paixao, Andreas Karvonen, Johan ├ůstrom, Trygve Tuveson and Torbjorn Thiringer, "EMI Reduction using Symmetrical Switching and Capacitor control", in proc. of 19th IEEE Intl. Zurich Symposium on Electromagnetic Compatibility, pp: 686- 689, 19- 23 May, Singapore, 2008, DOI: 10.1109/APEMC.2008.4559968. [20] Franc Mihalic and Dejan Kos, "Randomized PWM for conductive EMI reduction in DC-DC choppers", in proc. of HAIT Journal on Science and Engineering B, vol. 2, no. 5-6, pp: 594- 608, 2005. [21] Min-woo Kim, Do-wan Kim, Bon-sung Koo, Yong-bum Kim, Onsik Choi and Nam-deog Kim", Chip Level Techniques for EMI Reduction in LCD Panels", in proc. of IEEE Intl. Zurich Symposium on Electromagnetic Compatibility, pp: 441- 444, 12- 16 Jan. 2009, Doi: 10.1109/EMCZUR.2009.4783485. [22] Kato, T.Inoue, K.Akimasa, K.,"EMI Reduction Method for a Single- Phase PWM Inverter by Suppressing Common-Mode Currents with Complementary Switching", in proc. of 5th IEEE Intl. Conference and Power Electronic and Motion Control, vol. 3, pp: 1-5, 14- 16, August, Shanghai, 2006, Doi: 10.1109/IPEMC.2006.4778272. [23] Jalakas, T.Molder and H.Egorov, M., "EMI reduction problems in power converters with 6.5 kV IGBTs", in proc. of IEEE Conference on Power Quality and Supply Reliability, pp: 229- 233, 27- 29 August, Parnu, 2008, Doi: 10.1109/PQ.2008.4653766.

  • Wen-Lung Lu and Sheng-Nian Yeh, "Design and Implementation of Uninterruptible Power Supplies for Fluorescent Lamps with Electronic Ballast", in proc. of Natl. Sci. Counc. ROC (A), vol. 23, no. 6, pp: 728- 735, 1999.

245
13
views
downloads
All versions This version
Views 245248
Downloads 1313
Data volume 1.8 MB1.8 MB
Unique views 130131
Unique downloads 1313

Share

Cite as