When the symbol appears, you must proceed with the descaling equipment.
Use descaler recommended by DeLunghi only.
Failure to descale the appliance as described above also invalidates the guarantee.
Turn the machine on.
Access the settings menu by pressing the menu icon.
Scroll through the menu pressing the icon relative to one of the scrolling arrows to select descale.
Press the OK icon to select the function.
Press OK again to confirm.
Add descaler, fill water tank, press OK, is displayed.
Empty the water tank completely and remove the water softener filter, if present.
Pour the descaler into the tank up to the level A.
Corresponding to a 100ml pack, marked on the side of the tank, then add water.
One litre up to level B and put the water tank back.
Place an empty container with a minimum capacity of 1.5 litres under the hot waterspout.
Hot water containing acid flows out of a hot waterspout.
Avoid contact with splashes of water.
Start descaling by pressing the OK icon.
The descale program starts and the descaler liquid comes out of the waterspout.
The descale program automatically performs a series of rinses and pauses at regular intervals
to remove limescale deposits from inside the machine.
The cycle lasts about 30 minutes.
Rinsing, fill water tank.
The appliance is now ready for rinsing through with clean water.
Empty the container used to collect the descaler solution and replace it under the hot waterspout.
Remove the water tank.
Empty, rinse under running water, fill with clean water and replace.
Press the OK icon to start rinsing.
Hot water comes out of the spout.
When descaling complete, press OK as displayed, press the OK icon.
The appliance goes off.
Put the water softener filter, if present, back and fill the tank.
To use the appliance, press the on standby button.
