Data obtained directly from the machine measurements

Name of file: testtype_direction_frequency.csv

Dynamic mechanical analysis (DMA) tests were performed on PA12 samples printed in two orthogonal directions H and V, as indicated in Picture1.png

Dimensions: 30x10x3 mm

Machine equipment: Q800 TA Instruments
 
Single cantilever DMA tests were performed at three frequencies of 1, 3, and 30 Hz in a temperature range from - 100 °C to + 200 °C at a heating rate of 2 °C / min.

The .csv files columns contain:
	T(ºC)	E'(MPa)	tan delta

