
! inlist_wd_cool2


&star_job
      show_log_description_at_start = .false.
      
      !create_pre_main_sequence_model = .true.

      mesa_data_dir = '../../../data'

      save_model_when_terminate = .true.
      save_model_filename = 'cool.mod'

      load_saved_model = .true.
      saved_model_name = 'hires_surface.mod'

      log_columns_file = 'log_columns.list' 
      profile_columns_file = 'profile_columns.list' 

      
      
      !set_tau_factor = .true. ! change tau_factor without reconverging.
      !set_to_this_tau_factor = 0.00015
      !set_to_this_tau_factor = 1


      !pgstar_flag = .true.

      set_initial_model_number = .true.
      initial_model_number = 0


/ ! end of star_job namelist



&controls

         D_norm_kappa = 1
         D_norm_alpha = 2
         D_norm_atol = 1d-3
         D_norm_rtol = 1d-3
         
         use_lnE_for_eps_grav = .false.


      surf_bc_offset_factor = 0 ! until fix wd models


      max_surface_cell_dq = 1d-21 ! 1d-22

      
      correction_xa_limit = 5d-3
      
      gamma_center_limit = 1d99
      logQ_limit = 5.1
      
      max_age = 15e9

      photostep = 50
      profile_interval = 50
      log_cnt = 100
      terminal_cnt = 10
      write_header_frequency = 10

      !report_hydro_solver_progress = .true. ! set true to see info about newton iterations
      !report_ierr = .true. ! if true, produce terminal output when have some internal error

      report_why_dt_limits = .false.
      report_all_dt_limits = .false.
      write_varcontrol_internals = -1
      
      report_hydro_dt_info = .false.
      
      !show_mesh_changes = .true.
      !mesh_dump_call_number = 79

      trace_evolve = .false.
      
      ! hydro debugging
      !hydro_numerical_jacobian = .true.
      !hydro_check_everything = .true.
      !hydro_show_rcond = .true.
      !hydro_inspectB_flag = .true.
      !hydro_save_numjac_plot_data = .true.
      !hydro_dump_call_number = 213
      
      min_timestep_limit = 1d-12

                  
      RGB_wind_scheme = ''
      AGB_wind_scheme = ''
      
      
      accrete_same_as_surface = .false. 
      accretion_h1 = 0.749D+00
      accretion_h2 = 0
      accretion_he3 = 0.292910D-04
      accretion_he4 = 0.237D+00
      accretion_zfracs = 4 ! Lodders 03

      xa_function_species(1) = 'h1'  ! name of nuclide as defined in chem_def
		xa_function_weight(1) = 20
		xa_function_param(1) = 1d-6
      xa_function_species(2) = 'he4'  ! name of nuclide as defined in chem_def
		xa_function_weight(2) = 20
		xa_function_param(2) = 1d-2

      delta_lgL_H_limit = 0.05 ! limit for magnitude of change in lgL_H
      delta_lgL_H_hard_limit = 0.5
      lgL_H_burn_min = 1.5 ! ignore changes in lgL_H if value is less than this

      delta_lgL_He_limit = 0.025 ! limit for magnitude of change in lgL_He
      delta_lgL_He_hard_limit = 1
      lgL_He_burn_min = 2.5 ! ignore changes in lgL_He if value is less than this
   
      delta_lgL_limit = 0.05
      delta_lgL_hard_limit = 0.15

      delta_lgT_limit = 0.5
      delta_lgT_hard_limit = 1
      
      delta_lgRho_limit = 1
      delta_lgRho_hard_limit = -1

      delta_lgTeff_limit = 0.1  
      delta_lgTeff_hard_limit = 0.3

      !relax_hard_limits_after_backup = .false. 
      relax_hard_limits_after_retry = .false.


		mesh_delta_coeff = 2  !1.2
      
      net_logTcut_lo = 0
      net_logTcut_lim = 0

      use_CO_enhanced_opacities = .false.

         
      screening_mode = 'extended'
      
      !which_atm_option = 'grey_and_kap'
      which_atm_option = 'WD_tau_25_tables'


/ ! end of controls namelist



&pgstar
         
      ! top level controls

         !pause = .true. 
            ! if true, the code waits for user to enter a RETURN on the command line
      
      ! main window
      
         MAIN_win_flag = .true.
         
         show_TRho_Profile_with_main = .true.
      
         show_HR_TRho_with_main = .false. ! if false, use aspect ratio > 1
         MAIN_win_width = 7
         MAIN_win_aspect_ratio = 1.2 ! aspect_ratio = height/width
      
         xaxis_by = 'by_logxq' ! select xaxis for main window
            ! 1 = by_mass
            ! 2 = by_grid
            ! 3 = by_radius
            ! 4 = by_logR
            ! 5 = by_logP
            ! 6 = by_logxm
            ! 7 = h1_boundary_mass
            ! 8 = he4_boundary_mass
            ! 9 = c12_boundary_mass 
            
         show_main_win_text_info = .true.
         
         ! xaxis limits -- to override system default selections
         main_xmin = -12 !0.4
         !main_xmax = 0.5
         
         logxq_cutoff = -12.1 ! min value when using logxm for xaxis
         !main_logL_max = 7
         !main_logL_min = 0
         
         ! control for plot showing abundances
         log_mass_frac_ymax = 0.7 ! making this > 0 helps readability
         log_mass_frac_ymin = -7.5
         num_abundance_line_labels = 5
      
         log_abund_vary = 0.1 ! don't show species if it would vary by < this in plot
      
         ! file output
         !MAIN_file_flag = .true.
         MAIN_file_dir = 'png'
         MAIN_file_prefix = 'main'
         MAIN_file_cnt = 1 ! output when mod(model_number,main_file_cnt)==0
         
         
      ! Mode Propagation window (for asterseismology)
      
         Mode_Prop_win_flag = .true.
      
         Mode_Prop_win_width = 8
         Mode_Prop_win_aspect_ratio = 0.618 ! aspect_ratio = height/width
         
         Mode_Prop_nu_max_obs = 1000
      
         Mode_Prop_xaxis_by = 'by_logxq' ! select xaxis (same options as for main window)
         
         ! power xaxis limits -- to override system default selections
         Mode_Prop_xmin = -101 ! only used if > -100
         Mode_Prop_xmax = -101 ! only used if > -100
         
         ! power yaxis limits -- to override system default selections
         Mode_Prop_ymin = -101 ! only used if > -100
         Mode_Prop_ymax = -101 ! only used if > -100

         show_Mode_Prop_cross_hair = .false.
         
         ! file output
         Mode_Prop_file_flag = .false.
         Mode_Prop_file_dir = 'pgstar_out'
         Mode_Prop_file_prefix = 'mode_prop'
         Mode_Prop_file_cnt = 5 ! output when mod(model_number,Mode_Prop_file_cnt)==0
         Mode_Prop_file_width = -1 ! negative means use same value as for window
         Mode_Prop_file_aspect_ratio = -1 ! negative means use same value as for window      
      
               
               
      ! TRho Profile window -- current model in T-Rho plane
      
         TRho_Profile_win_flag = .false.

         TRho_Profile_win_width = 7.5
         TRho_Profile_win_aspect_ratio = 0.618 ! aspect_ratio = height/width
            
         show_TRho_Profile_text_info = .false.
         show_TRho_Profile_legend = .true.
         show_HR_TRho_with_TRho_Profile = .false.
         show_TRho_Profile_burn_labels = .true.
         TRho_Profile_show_logQ_limit = .true.
         !show_TRho_Profile_cross_hair = .true.
         show_TRho_Profile_mass_locs = .false.

         show_TRho_Profile_kap_regions = .false.
         show_TRho_Profile_eos_regions = .true.
         show_TRho_Profile_degeneracy_line = .true.
         show_TRho_Profile_Pgas_Prad_line = .true.
         show_TRho_Profile_burn_lines = .true.

         !show_TRho_Profile_annotation1 = .true.
         !show_TRho_Profile_annotation2 = .true.
         !show_TRho_Profile_annotation3 = .true.
      
         ! axis limits
         TRho_Profile_xmin = -10
         TRho_Profile_xmax = 10
         TRho_Profile_ymin = 3.0
         TRho_Profile_ymax = 10
         
         ! file output
         !TRho_Profile_file_flag = .true.
         TRho_Profile_file_dir = 'png'
         TRho_Profile_file_prefix = 'trho_profile'
         TRho_Profile_file_cnt = 2 ! output when mod(model_number,TRho_Profile_file_cnt)==0
      
      
      ! Profile window
      
         !Profile_win_flag = .true.

         Profile_win_width = 7.5
         Profile_win_aspect_ratio = 0.618 ! aspect_ratio = height/width
            
         show_Profile_legend = .false.
         Profile_legend_coord = 0.65
         Profile_legend_fjust = 0.0
         Profile_legend_disp1 = -7.5
         Profile_legend_del_disp = -1.5
         Profile_show_mass_locs = .false.
         Profile_show_decorated_line = .false.
         
         show_HR_TRho_with_Profile = .false.
         show_Profile_text_info = .false.
         Profile_text_info_xfac = 0.78 ! controls x location
         Profile_text_info_dxfac = 0.02 ! controls x spacing to value from text
         Profile_text_info_yfac = 0.95 ! controls y location of 1st line
         Profile_text_info_dyfac = -0.04 ! controls line spacing
         show_Profile_cross_hair = .false.

         show_Profile_annotation1 = .false.
         show_Profile_annotation2 = .false.
         show_Profile_annotation3 = .false.
         
         ! axis choices
            ! to get a list of axis identifiers, edit your star_job controls
               ! to set show_profile_column_numbers = .true.
            ! you can use any identifier for x or y
         Profile_xaxis_name = 'logxq'
         Profile_xaxis_reversed = .true.
         Profile_xmin = -12  ! only used if > -100
         !Profile_xmax = 1.2 !-101 ! only used if > -100
         
         Profile_yaxis_name = 'entropy' !'grada'
         Profile_yaxis_reversed = .false.
         Profile_ymin = -111 !5.4 ! only used if > -100
         Profile_ymax = -111 !8.6 ! only used if > -100    
         Profile_dymin = 0.025    
         
         Profile_other_yaxis_name = 'logL'
         Profile_other_yaxis_reversed = .false.
         Profile_other_ymin = -101 ! only used if > -100
         Profile_other_ymax = -101 ! only used if > -100        
         
         ! file output
         !Profile_file_flag = .true.
         Profile_file_dir = 'png'
         Profile_file_prefix = 'profile'
         Profile_file_cnt = 5 ! output when mod(model_number,Profile_file_cnt)==0
      
      
      ! Convection window -- history of convection and more.
      
         CONV_win_flag = .false.
      
         CONV_win_width = 9
         CONV_win_aspect_ratio = 0.62 ! aspect_ratio = height/width
      
         ! axis limits
         CONV_xmax = -1 ! step number.  negative means use default.
         CONV_xmin = -1 ! step number.  negative means use default.
         CONV_max_width = 0 ! only used if > 0.  causes xmin to move with xmax.
         CONV_mmax = 1.00007  !-1 ! (Msun units) negative means use start initial mass
         CONV_mmin = 1  !0 ! (Msun units)
         CONV_lgLmax = -101 ! only used if > -100; (L in Lsun units)
         CONV_lgLmin = -2 ! only used if > -100; (L in Lsun units)

         CONV_show_burn = .true.
         CONV_show_mixing = .true.
         CONV_show_log_radius = .true.
         CONV_show_luminosities = .true.
         CONV_show_mass_boundaries = .true.

         show_CONV_annotation1 = .false.
         show_CONV_annotation2 = .false.
         show_CONV_annotation3 = .false.
         
         ! file output
         CONV_file_flag = .false.
         CONV_file_dir = 'pgstar_out'
         CONV_file_prefix = 'conv'
         CONV_file_cnt = 5 ! output when mod(model_number,CONV_file_cnt)==0
         CONV_file_width = -1 ! negative means use same value as for window
         CONV_file_aspect_ratio = -1 ! negative means use same value as for window
      
      
         
         
      ! Surface History window
      
         Surf_Hist_win_flag = .false.
      
         Surf_Hist_win_width = 6.5
         Surf_Hist_win_aspect_ratio = 1.2 ! aspect_ratio = height/width
      
         ! axis limits
         Surf_Hist_xmax = -1 ! step number.  negative means use default.
         Surf_Hist_xmin = -1 ! step number.  negative means use default.
         Surf_Hist_max_width = 0 ! only used if > 0.  causes xmin to move with xmax.
         
         ! abundance limits
         Surf_Hist_mass_frac_min = 0
         Surf_Hist_mass_frac_max = 1.1 ! > 0 helps legibility

         show_Surf_Hist_annotation1 = .false.
         show_Surf_Hist_annotation2 = .false.
         show_Surf_Hist_annotation3 = .false.
         
         ! file output
         Surf_Hist_file_flag = .false.
         Surf_Hist_file_dir = 'pgstar_out'
         Surf_Hist_file_prefix = 'conv'
         Surf_Hist_file_cnt = 5 ! output when mod(model_number,Surf_Hist_file_cnt)==0
         Surf_Hist_file_width = -1 ! negative means use same value as for window
         Surf_Hist_file_aspect_ratio = -1 ! negative means use same value as for window
      
         
         
      ! Power window
      
         Power_win_flag = .false.
      
         Power_win_width = 8.5
         Power_win_aspect_ratio = 0.618 ! aspect_ratio = height/width
      
         Power_xaxis_by = 6 ! select xaxis
            ! 1 = by_mass
            ! 2 = by_grid
            ! 3 = by_radius
            ! 4 = by_logR
            ! 5 = by_logP
            ! 6 = by_logxm
         
         ! power xaxis limits -- to override system default selections
         Power_xmin = -101 ! only used if > -100
         Power_xmax = -101 ! only used if > -100
         
         ! power yaxis limits -- to override system default selections
         Power_ymin = -101 ! only used if > -100
         Power_ymax = -101 ! only used if > -100

         show_Power_cross_hair = .false.
         
         ! file output
         Power_file_flag = .false.
         Power_file_dir = 'pgstar_out'
         Power_file_prefix = 'power'
         Power_file_cnt = 5 ! output when mod(model_number,Power_file_cnt)==0
         Power_file_width = -1 ! negative means use same value as for window
         Power_file_aspect_ratio = -1 ! negative means use same value as for window
         
         
      ! Abundance window
      
         Abundance_win_flag = .false.
      
         Abundance_win_width = 8.5
         Abundance_win_aspect_ratio = 0.618 ! aspect_ratio = height/width
      
         Abundance_xaxis_by = 6 ! select xaxis
            ! 1 = by_mass
            ! 2 = by_grid
            ! 3 = by_radius
            ! 4 = by_logR
            ! 5 = by_logP
            ! 6 = by_logxm
         
         ! power xaxis limits -- to override system default selections
         Abundance_xmin = -101 ! only used if > -100
         Abundance_xmax = -101 ! only used if > -100
         
         ! power yaxis limits -- to override system default selections
         Abundance_log_mass_frac_min = 1 ! only used if < 0
         Abundance_log_mass_frac_max = 1 ! only used if < 0

         show_Abundance_cross_hair = .false.
         
         ! file output
         Abundance_file_flag = .false.
         Abundance_file_dir = 'pgstar_out'
         Abundance_file_prefix = 'abund'
         Abundance_file_cnt = 5 ! output when mod(model_number,Abundance_file_cnt)==0
         Abundance_file_width = -1 ! negative means use same value as for window
         Abundance_file_aspect_ratio = -1 ! negative means use same value as for window
         
         


/ ! end of pgstar namelist
