# ------------------  INPUTS TO MAIN PROGRAM  -------------------
max_step = 100000

# PROBLEM SIZE & GEOMETRY
geometry.is_periodic = 1         0
geometry.coord_sys   = 0                  # 0 => cart, 1 => RZ  2=>spherical
geometry.prob_lo     = 0         0
geometry.prob_hi     = 12.192e7  6.096e7
amr.n_cell           = 256       128

# >>>>>>>>>>>>>  BC FLAGS <<<<<<<<<<<<<<<<
# 0 = Interior           3 = Symmetry
# 1 = Inflow             4 = SlipWall
# 2 = Outflow            5 = NoSlipWall
# >>>>>>>>>>>>>  BC FLAGS <<<<<<<<<<<<<<<<
castro.lo_bc       =  0   3
castro.hi_bc       =  0   2
castro.yl_ext_bc_type = 1

castro.hse_interp_temp = 1
castro.hse_reflect_vels = 1

castro.fill_ambient_bc = 1
castro.ambient_fill_dir = 1
castro.ambient_outflow_vel = 1

# WHICH PHYSICS
castro.do_hydro = 1           #hydrodynamics
castro.do_react = 1           #microphysics
castro.do_grav = 1            #gravity
castro.do_sponge = 0          #using sponge

castro.ppm_type = 1
castro.grav_source_type = 2
castro.use_pslope = 1
castro.pslope_cutoff_density = 1.0e-5

castro.use_flattening = 1

castro.small_temp = 1.0e6
castro.small_dens = 1.0e-6

gravity.gravity_type = ConstantGrav
gravity.const_grav   = -7.33e8

castro.react_rho_min = 1.0e2
castro.react_T_min = 1.0e7

# TIME STEP CONTROL
castro.cfl            = 0.8     # cfl number for hyperbolic system
castro.init_shrink    = 0.1     # scale back initial timestep
castro.change_max     = 1.1     # max time step growth

# DIAGNOSTICS & VERBOSITY
castro.sum_interval   = 1       # timesteps between computing mass
castro.v              = 1       # verbosity in Castro.cpp
amr.v                 = 1       # verbosity in Amr.cpp


# REFINEMENT / REGRIDDING
amr.max_level       = 5       # maximum level number allowed
amr.ref_ratio       = 2 2 2 2 2 2 # refinement ratio
amr.regrid_int      = 2 2 2 2 2 2 # how often to regrid
amr.blocking_factor = 128     # block factor in grid generation
amr.max_grid_size   = 256
amr.n_error_buf     = 2 2 2 2 2 2 # number of buffer cells in error est

# CHECKPOINT FILES
amr.check_file      = chk        # root name of checkpoint file
amr.check_int       = 200       # number of timesteps between checkpoints

# PLOTFILES
amr.plot_file        = plt        # root name of plotfile
amr.plot_int         = 500        # number of timesteps between plotfiles
amr.derive_plot_vars = ALL

# DATA LOG
amr.data_log = log

# problem initialization

problem.model_name =  "glasner_T9_1e+04cm.hse"

problem.apply_vel_field = 0
#problem.velpert_scale = 5.0e5
#problem.velpert_scale_ratio = 7.0
#problem.velpert_amplitude = 7.0e5
#problem.num_vortices = 8


problem.apply_temp_field = 1
problem.width = 1.0e6
problem.amplitude = 0.5
problem.num_vortices = 10
problem.width_ratio = 1.8

# Microphysics

# Microphysics

integrator.jacobian = 2
integrator.rtol_spec = 1.e-6
integrator.atol_spec = 1.e-6
integrator.rtol_enuc = 1.e-6

# refinement
amr.refinement_indicators = dens temp edot

amr.refine.dens.max_level = 5
amr.refine.dens.value_greater = 1.0e2
amr.refine.dens.field_name = density

amr.refine.temp.max_level = 5
amr.refine.temp.value_greater = 3.0e7
amr.refine.temp.field_name = Temp

amr.refine.edot.max_level = 5
amr.refine.edot.value_greater = 1.0e10
amr.refine.edot.field_name = enuc

