The datasets used in the manuscript are listed below.



Fig. 2c:
Resistance extracted using the slope of the IV curves using R= dV/dI and subtracting the line resistance = 10kohms (X2) from the 2-probe resistance values to get the channel resistance, for the case of annealing 300C for 2 hours the channel resistance is calculated using the 4-probe measurement.


the data for each device is stored in the respective folder: 
	
	no annealing : data for no annealing sample
	150C for 10 min : data for sample annealed at 150C for 10 minutes
	150C for 30 min : data for sample annealed at 150C for 30 minutes
	300C for 2h : data for sample annealed at 300C for 2 hours

	

DAT files: measured with QCodes
hdf5 files: measured with Labber

