The datasets used in the manuscript are listed below.



Fig. 2c:
Resistance extracted using the slope of the IV curves using R= dV/dI and subtracting the line resistance = 125 ohms (X2) for the files measured using Qcodes (these samples were measured in a fridge with a line resistance of 125 ohms) to get the 2 probe resistance.

Data measured with labber was measrured in a fridge with a line resistance of 1.5kohms, therefore 1.5kohms (x2) was subtracted to achieve the 2 probe resistance from the extracted resistance values.


the data for each device is stored in the respective folder: 
	
	no ALD : data for "O2 plasma" and "as-grown" sample respectively without AlOx
	ALD 90C : data for "O2 plasma" and "as-grown" sample respectively with AlOx grown at 90C
	ALD 22C : data for "O2 plasma" and "as-grown" sample respectively with AlOx grown at 225C
		

DAT files: measured with QCodes
hdf5 files: measured with Labber

