1001 Aerodyn Outputs
          6   NBlOuts             - Number of blade node outputs [0 - 9] (-)
          6,          8,         10, 		12, 		14, 		17    BlOutNd             - Blade nodes whose values will be output  (-)
          0   NTwOuts             - Number of tower node outputs [0 - 9]  (-)
          1,          2,          6    TwOutNd             - Tower nodes whose values will be output  (-)
                   OutList             - The next line(s) contains a list of output parameters.  See OutListParameters.xlsx for a listing of available output channels, (-)
"B1Pitch"               - Blade Pitch
"B1N1Cl"
"B1N2Cl"
"B1N3Cl"
"B1N4Cl"
"B1N5Cl"
"B1N6Cl"

"B1N1Cd"
"B1N2Cd"
"B1N3Cd"
"B1N4Cd"
"B1N5Cd"
"B1N6Cd"

END of input file (the word "END" must appear in the first 3 columns of this last OutList line)
  ---------------------- NODE OUTPUTS --------------------------------------------
          3   BldNd_BladesOut  - Blades to output
          6   BldNd_BlOutNd   - Blade nodes on each blade (currently unused)
              OutList     - The next line(s) contains a list of output parameters.  See OutListParameters.xlsx, AeroDyn_Nodes tab for a listing of available output channels, (-)
END of input file (the word "END" must appear in the first 3 columns of this last OutList line)
---------------------------------------------------------------------------------------
1001 ElastoDyn Outputs
          0   NTwGages    - Number of tower nodes that have strain gages for output [0 to 9] (-)
         10,         19,         28    TwrGagNd    - List of tower nodes that have strain gages [1 to TwrNodes] (-) [unused if NTwGages=0]
          0   NBlGages    - Number of blade nodes that have strain gages for output [0 to 9] (-)
          3,          6,         9,      12,     15,     17    BldGagNd    - List of blade nodes that have strain gages [1 to BldNodes] (-) [unused if NBlGages=0]
              OutList     - The next line(s) contains a list of output parameters.  See OutListParameters.xlsx for a listing of available output channels, (-)

"RootFxb1"                - Blade flapwise shear force at the blade root

"RootFyb1"                - Blade edgewise shear force at the blade root

"RootFzc1"                - Blade axial force at the blade root

"RootMxb1"                - Blade edgewise moment(i.e., the moment caused by edgewise forces) at the blade root

"RootMyb1"                - Blade flapwise moment(i.e., the moment caused by flapwise forces) at the blade root

"RootMzc1"                - Blade pitching moment at the blade root

"TipDxc1"              - Blade out-of-plane tip deflection (relative to the undeflected position)

"TipDyc1"              - Blade in-plane tip deflection (relative to the undeflected position)

"TipDzc1"              - Blade axial tip deflection (relative to the undeflected position)

"TipDxb1"              - Blade flapwise tip deflection (relative to the undeflected position)

"TipDyb1"               - Blade edgewise tip deflection (relative to the undeflected position)

"TipALxb1"              - Blade local flapwise tip acceleration (absolute)

"TipALyb1"              - Blade local edgewise tip acceleration (absolute)

"TipALzb1"              - Blade local axial tip acceleration (absolute)

"TipRDxb1"              - Blade roll (angular/rotational) tip deflection (relative to the undeflected position).In ADAMS, it is output as an Euler angle computed as the 3rd rotation in theyaw-pitch-roll rotation sequence. It is not output as an Euler angle in FAST,which assumes small blade deflections, so that the rotation sequence does not matter.

"TipRDyb1"              - Blade pitch (angular/rotational) tip deflection (relative to the undeflected position).In ADAMS, it is output as an Euler angle computed as the 2nd rotation in theyaw-pitch-roll rotation sequence. It is not output as an Euler angle in FAST,which assumes small blade deflections, so that the rotation sequence does not matter

"HSShftV"               - Angular Speed of Highspeed shaft and Generator

END of input file (the word "END" must appear in the first 3 columns of this last OutList line)
---------------------- NODE OUTPUTS --------------------------------------------
        3   BldNd_BladesOut  - Blades to output
        6   BldNd_BlOutNd   - Blade nodes on each blade (currently unused)
            OutList     - The next line(s) contains a list of output parameters.  See OutListParameters.xlsx, AeroDyn_Nodes tab for a listing of available output channels, (-)
END of input file (the word "END" must appear in the first 3 columns of this last OutList line)
---------------------------------------------------------------------------------------
1001 Inflow Wind

END of input file (the word "END" must appear in the first 3 columns of this last OutList line)
---------------------------------------------------------------------------------------
1001 ServoDyn
"GenPwr"                  - Electrical generator power and torque
"GenTq"                   - Electrical generator power and torque
END of input file (the word "END" must appear in the first 3 columns of this last OutList line)
---------------------------------------------------------------------------------------
