Published May 5, 2019
| Version v1
Dataset
Open
IODP Expedition 372A Vane shear strength (AVS)
Creators
-
Barnes, Philip M.
-
Pecher, Ingo A.
-
LeVay, Leah J.
-
Bourlange, Sylvain
-
Brunet, Morgane M.Y.
-
Cardona, Sebastian
-
Clennell, Michael B.
-
Cook, Ann E.
-
Crundwell, Martin P.
-
Dugan, Brandon
-
Elger, Judith
-
Gamboa, Davide
-
Georgiopoulou, Aggeliki
-
Greve, Annika
-
Han, Shuoshuo
-
Heeschen, Katja U.
-
Hu, Gaowei
- Kim, Gil Young
-
Kitajima, Hiroko
-
Koge, Hiroaki
- Li, Xuesen
-
Machado, Karina S.
-
McNamara, David D.
-
Moore, Gregory F.
-
Mountjoy, Joshu J.
-
Nole, Michael A.
-
Owari, Satoko
-
Paganoni, Matteo
-
Petronotis, Katerina
-
Rose, Paula S.
-
Screaton, Elizabeth J.
-
Shankar, Uma
-
Shepherd, Claire L.
-
Torres, Marta E.
-
Underwood, Michael B.
-
Wang, Xiujuan
-
Woodhouse, Adam D.
-
Wu, Hung-Yu (Sonata)
Contributors
Data collector:
Description
Shear strength was measured on section halves using a GEISA automated vane shear (AVS) frame and device controller. The device is suitable for sediment not affected by cementation (i.e., saturated, clay-rich, soft sediment). Shear strength measurements should be considered only approximate, particularly because the influence of pore pressure changes during the undrained experiment cannot be estimated. Report includes vane shear strength at the sample's failure point, maximum torque angle, penetration direction, and rate of vane rotation.
Files
AVS-README.txt
Additional details
Related works
- Is documented by
- 10.14379/iodp.proc.372A.2019 (DOI)